User Provisioning For Service Filter; Snmp Provisioning For Service Filter - Technicolor CGA4131 Operation Manual

8.5.1

User provisioning for Service Filter

User can enable this feature by enabling the Service Filter option.
Blocked Services
The user needs to create the services list. This can be done by adding an entry and selecting
the protocol and port information. The user needs to configure the time of the day
configurations (option When) – the time when the filter should be enabled for the enabled
devices.
Trusted Devices
The user needs to enable or disable the feature for the specific devices – this can be done
by enabling the Trusted button in the Trusted Devices list. If the Trusted button is enabled,
the service filter is applied as per the service filter definitions (Protocol, Port Range and Time
of the day).
8.5.2

SNMP provisioning for Service Filter

The following MIBs configure the Service Filter feature:
3/6/2018
Figure 8.8
Proprietary and Confidential - Technicolor 88