Technicolor CGA4131 Operation Manual page 72

5 rdkbRgDot11BssClosedNetwork
6 rdkbRgDot11BssAccessMode
7 rdkbRgDot11BssMaxNumSta
8 rdkbRgDot11BssCountStaAsCpe
9 rdkbRgDot11BssUserStatus
10 rdkbRgDot11BssHotSpot
11 rdkbRgDot11BssApIsolation
The following MIBS determine how many user controlled and admin controlled Guest Wi-Fi
can be configured and displayed in GUI:
S. No. MIBs
1 rdkbRgDot11ExtMbssUserControl
2 rdkbRgDot11ExtMbssUseNonvol
3 rdkbRgDot11ExtMbssAdminControl Sets the number of admin controlled
3/6/2018
Controls whether the device will
operate in closed network mode.
Controls what stations will be given
access to the device.
This object defines the maximum
number of STAs that can connect to
this SSID. Note that the maximum
number of STA across all SSIDs in the
AP is 128. Default value is 128 for all
SSIDs.
This setting is used to control
counting STAs in Max-Count of
CPEs.
Provides the BSS Id Web UI or
Wireless ON/OFF (if exist) status that
is set by the user.
Determines/Sets whether this BSS is a
Hotspot BSS. This allows the MSO to
specify which BSS is configured for
Hotspot Operation.
AP
Isolation) allows isolating traffic
between CPEs on the same Wi-Fi
SSID.
Proprietary and Confidential - Technicolor
Isolation (Access
Description
Sets the number of user controlled
guest networks via Web UI
Allows to save additional BSS
parameters to non-vol if set to
TRUE
guest networks via Web UI
Point
66