Technicolor CGA4131 Operation Manual page 44

CAUTION: BRIDGE MODE MAY PREVENT MULTIPLE DEVICES FROM ACCESSING
THE INTERNET.
6.3.1.2 SNMP provisioning for Bridge Mode
To configure the device in Bridge mode, set the corresponding interface instance of
rdkbRgIpMgmtLanMode.32 to bridge (1).
6.3.1.3 Connection Mode
There are 2 connection modes possible – DHCP or Static IP. When DHCP is selected, the
WAN IP (eRouter IP) is configured automatically by the MSO DHCP Server.
In case of static IP, the details (IP address, Subnet Mask, Default Gateway, DNS
configuration, MTU, etc.) needs to be obtained from the MSO and entered through the Web
UI.
Provisioning WAN IP through DHCP
3/6/2018
Figure 6.5
Proprietary and Confidential - Technicolor 38