Neighbor Address: Defines a neighboring device to which the routing information is
•
exchanged.
6.4.4
SNMP provisioning for Advanced Routing Feature
MaxCPE settings (specific to CM config file)
MaxCPE "N" where "N" is the number of clients (CPE) that can be connected.
In case the customer network is behind a router (Example with customer router), customer
subnet needs to be advertised back to the IP backbone network (static configuration).
6.5
Modem
Connection Tab / Modem
Click on the Connection tab then click on the Modem tab. The gateway will display the
various modem parameters:
The Downstream Frequency is the frequency at which the modem is locked with
•
the CMTS during channel scan
Scan Start Frequency is the frequency at which the modem tries to lock first, as this
•
will be the frequency at which the modem was able to connect last time and is saved
as favorite channel.
Upstream Channel ID is shows locked Upstream Channel Id for Cable Modem.
•
6.6
MTA
This page displays the MTA line status and the logs.
3/6/2018
Figure 6.11
Proprietary and Confidential - Technicolor
45