User Provisioning For Vpn - Technicolor CGA4131 Operation Manual

8.6.1

User provisioning for VPN

The following table explains the various parameters and possible configurations for each of
the parameters to edit/create a VPN entry:
VPN Tunnel
Enable
Tunnel Name:
Local Secure Group
3/6/2018
Figure 8.12
Select Tunnel Entry:
Select a tunnel to configure.
'+" Button: Click this button to create a new tunnel.
'X' Button: Click this button to delete all settings for the selected
tunnel.
To Enable VPN Tunnel.
Enter a name for this tunnel, such as London Office.
Select the local LAN user(s) that can use this VPN tunnel. This
may be a single IP address or sub-network. Note that the Local
Secure Group must match the remote gateway's Remote Secure
Group.
IP Address:
Enter the IP address on the local network.
Subnet Mask:
If the Subnet option is selected, enter the mask to determine the
IP Addresses on the local network.
Proprietary and Confidential - Technicolor 91