Snmp Provisioning For Port Forwarding And Port Triggering; Port Filter - Technicolor CGA4131 Operation Manual

9.2.2

SNMP provisioning for Port Forwarding and Port Triggering

S. MIBs
No
.
1 rdkbRgFirewallApplySettings
2 rdkbRgFirewallPortForwardEnabl
e
3 rdkbRgFirewallPortTriggerEnable
9.3

Port Filter

The Port Filter page is used to block certain port requests coming from the LAN to WAN
devices connected through the router. User can block the range of ports to be blocked by
configuring them for a particular traffic.
Application Tab / Port Filter
Click on Application tab then click on Port Filter tab. The page displays following Port Filter
setup information, which can be viewed and modified by user:
Range of Ports
•
Traffic / Protocol
•
Enable the filter
•
Delete the filter entry
•
3/6/2018
Description
For Port Forwarding and Port Range
Triggering, the following MIBs are used to
control it: For all Firewall MIBs to be
applied remember to set the
rdkbRgFirewallApplySettings to 1.
rdkbRgFirewallPortForwardEnable sets
True to enable, False to Disable. Default is
False.
rdkbRgFirewallPortTriggerEnablesetsTr
ue to enable, False to Disable. Default is
False.
Proprietary and Confidential - Technicolor 99