Docsis Status - Technicolor CGA4131 Operation Manual

5.5

DOCSIS Status

This page displays status information about the DOCSIS connection.
Status Tab / DOCSIS Status
Click on Status tab, and then click on DOCSIS Status. DOCSIS Status page explains the
network connectivity and Cable Modem status. The following information is displayed:
Cable Modem Parameters:
This section displays information about the RF upstream Bonding, including CM Status,
Active Time, IPv6 Address, IPv4 Address, Subnet Mask, IP Gateway, TFTP Server, Time
Server, Time Offset, DHCP Lease Time, DHCP Rebind Time and DHCP Renew parameters.
CM Status – possible cable modem status states are other, notReady,
•
notSynchronized, phySynchronized, usParametersAcquired, rangingComplete,
ipComplete, todEstablished,
registrationComplete, operational andaccessDenied.
Active time - The time since the network management portion of the system was last
•
re-initialized.
Ethernet List:
This section displays information about the Ethernet ports and any devices connected to
them and show Interface Name, Link Status, Link Speed and Link Duplex parameters.
Interface name displays Displays the port number in general (Ethernet 1 / Ethernet
•
2, etc.)
Link Status - If there is any activity on the Link (Any Device connected) the Link
•
Status is shown as "UP", otherwise it is shown as "DOWN"
Link Speed and Link Duplex - Speed of 10/100/1000 and is it half duplex, full duplex
•
or Auto
CPE List:
This section displays the IP Address (IPv4 and/or IPv6) and MAC Address of the
•
devices connected.
The following figures provide these details displayed in the page:
3/6/2018
securityEstablished,
Proprietary and Confidential - Technicolor
paramTransferComplete,
21