Applications; Port Forward; User Provisioning For Port Forward - Technicolor CGA4131 Operation Manual

9 Applications

9.1

Port Forward

Port Forwarding allows running a publicly accessible server on the LAN by specifying the
mapping of TCP/UDP ports to a local PC. To specify a mapping, enter the range of port
numbers that should be forwarded locally, and the IP address to which traffic to those ports
should be sent. If only a single port specification is desired, enter the same port number in
the start and end locations for that IP address.
Application Tab / Port Forward
Click on the Application tab then click on the Port Forward settings tab. This page displays
Port Forward information - Start Port, End Port, Type, Service IP, Service IPv6, Enable and
Delete.
Figure 9.1
9.1.1

User provisioning for Port Forward

The user can select the range of ports and the types of traffic to be forwarded to an IP
address. The range information can be configured in Start Port and End Port fields. Currently
the option is to select either TCP traffic alone or UDP traffic alone or both. The user needs
to provide the IP address details for the IPv4 and IPv6 traffic (as per the need).
Turning the enable button would enable the port forwarding feature; the entries can be
deleted from the table using the Delete button.
3/6/2018 Proprietary and Confidential - Technicolor 97