Snmp Provisioning For Spectrum Analyzer; System - Technicolor CGA4131 Operation Manual

CUSTOM - After clicking Birth Certificate Capture button, It'll be showing
•
"Capture Started..." and wait for the "Capture Complete!" message. After that
graph will start again.
A user can then change the various parameters to suite the required measurements using
the Web UI options.
5.8.1

SNMP provisioning for Spectrum Analyzer

The spectrum analyzer feature can be controlled via SNMP in order to collect the data from
the demodulators as well as change various parameters. The following MIBs are supported:
tchCmSpectrumAnalysis
tchCmSpectrumAnalysisFrequency
tchCmSpectrumAnalysisAmplitudeData
tchCmSpectrumAnalysisEnable
tchCmSpectrumAnalysisInactivityTimeout
tchCmSpectrumAnalysisDiagnosticMode
tchCmSpectrumAnalysisFirstSegmentCenterFrequency
tchCmSpectrumAnalysisLastSegmentCenterFrequency
tchCmSpectrumAnalysisSegmentFrequencySpan
tchCmSpectrumAnalysisBinsPerSegment
tchCmSpectrumAnalysisWindowFunction
tchCmSpectrumAnalysisEquivalentNoiseBandwidth
5.9

System

Status Tab / System
This page displays further information on the DOCSIS connection, system software and
hardware configuration. Click on the Status tab then click on System.
DOCSIS State:
This section displays information about the DOCSIS State including Initialize Hardware,
Acquire Downstream Channel, Upstream Ranging, DHCP Bound, Set Time-of-Day,
Configuration File Download, Registration and CM Status.
System Software:
This section displays information about the System Software including the Model Name,
Vendor, Serial Number, Software Version, Firmware File Name, Firmware Build Time,
Bootloader Version, Core Version, Local Time and System Uptime.
System Hardware:
This section displays information about the System Hardware including the Hardware
Version, Processor Speed, Flash Size, Total Memory and MAC Address.
The DOCSIS State page is displayed below:
3/6/2018 Proprietary and Confidential - Technicolor 29