Snmp Provisioning For Dmz - Technicolor CGA4131 Operation Manual

Application Tab/ DMZ
Click on Application tab then click on DMZ tab. This page displays DMZ setup information.
Here a user can enable the DMZ feature, enter the host address (both IPv4 and IPv6) and
save the configuration.
9.5.1

SNMP provisioning for DMZ

S. No. MIBs
1 rdkbRgFirewallDmzAddress
2 rdkbRgFirewallApplySettings
3/6/2018
Figure 9.5
Description
For DMZ Host IP address set the
following MIB
For
rdkbRgFirewallApplySettings to 1 to
take effect.
Proprietary and Confidential - Technicolor
all firewall MIBS set the
102