Motion Setup - Samsung SHR-3040 User Manual

setup

motion setup

You can specify an area to detect a motion.
If you select an area to detect a motion, the DVR will detect any motion occurring in that area.
See the previous section to repeat steps 1~3. (Page 30)
. Use the up/down ($%) button to select <mOtiON
setuP>, and press [OK].
The "mOtiON setuP" screen appears.
. Use the up/down ($%) button to move to a desired item.
CHANNEL: Select a channel to set the motion detection.
~
~ SENSITIVITY: Adjust the sensitivity of the motion detection.
If the level increases from 1 to 6 one by one, the sensitivity
will be increased accordingly.
~ DURATION: Set the recording duration from the moment a motion is
detected. You can specify the duration between 2 and 99 seconds.
~ SIZE: Specify the number of cells to be selected at once.
Ex) If you select 3, a total of 9 cells (3X3) will be selected.
. Use the four direction ($%_ +) buttons and press [OK]
to set the motion area.
Motion detection is activated for the area that is selected in red.
`
By default, all cells are set to disabled.
`
If you use the cursor to set the motion area, select a cell and set it to 'ACTIVE/INACTIVE'.
Left-click a cell and drag it until a desired cell block is shaped.
When a desired block is selected, release the left button of the mouse.
. When done, select <OK>.
Your setting will be applied.
If you select <DeFault>, the selected channel will be reset to the default, and if selecting <all-DeFault>, all
the channels will be reset to the factory default.
. To return to the previous menu, select <esc>.
alarm setup
You can set the input system of the alarm that is connected to the DVR.
See the previous section to repeat steps 1~3. (Page 30)
. Use the up/down ($%) button to select <alarm
setuP>, and press [OK].
The "alarm setuP" screen appears.
_ setup
02489A_SHR-3040_ENG.indb 32
CONFIGURATION
HDD MANAGEMENT
CAMERA SETUP
MOTION SETUP
ALARM SETUP
INTERVAL SETUP
DATE/TIME SETUP
PASSWORD SETUP
BUZZER SETUP
MOTION SETUP
CHANNEL
CH1
SENSITIVITY
6
DURATION
05
SIZE
2
DEFAULT ALL-DEFAULT
CONFIGURATION
HDD MANAGEMENT
CAMERA SETUP
MOTION SETUP
ALARM SETUP
INTERVAL SETUP
DATE/TIME SETUP
PASSWORD SETUP
BUZZER SETUP
ESC
OK
ESC
ESC
2009-11-10 오후 2:13:43