Language - Samsung SHR-3040 User Manual

setup
load setup
1. Connect the USB device where your settings are saved.
. Select <lOaD setuP>.
The DVR settings will be changed to your settings with a
message of "lOaD setuP success" on the screen.
`
It takes 5 to 10 seconds, depending on the USB device. This will
change the DVR settings, not the factory default.

laNGuaGe

You can select a language to your preference.
1. Use the up/down ($%) button to select a language.
The selected language will be applied immediately.
_ setup
02489A_SHR-3040_ENG.indb 46
FACTORY DEFAULT
ALL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
DISPLAY SETUP
RECORD SETUP
SCHEDULE SETUP
CAMERA SETUP
CONFIGURATION
EXTERNAL DEVICE
CHANGE FACTORY DEFAULT
LOAD SETUP
SAVE SETUP
DEFAULT
MAIN MENU
DISPLAY SETUP
RECORD
CONFIGURATION
EXTERNAL DEVICE
BACK-UP
FIRMWARE UPGRADE
FACTORY DEFAULT
LANGUAGE
SHUTDOWN
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ESC
ENGLISH
EXIT
2009-11-10 오후 2:14:03