Dvr Network - Samsung SHR-3040 User Manual

if using a router
Check the followings to prevent a possible confl ict with the static IP of the DVR.
using Dvr static iP
Internet Connection : You can connect the DVR to a ADSL/Cable modem-based IP router, or to the IP router
in the LAN environment.

Dvr Network

1. Set <DHcP mODe> to <maNual> in "maiN meNu >
eXterNal Device > tcP/iP setuP > iP setuP".
. Check if the IP is a static IP provided by the router.
`
For information about the IP, gateway, and subnet mask, contact
your network administrator.
M
`
router DHcP iP address
1. To access the IP router menu, provide the router address in the address bar of the Internet browser from a
local PC in connection with the IP router.(ex: http://192.168.1.1)
.
Then, specify the network settings of the local PC as follows:
`
Ex) IP: 192.168.1.2
Subnet mask: 255.255.255.0
Gateway: 192.168.1.1
. Use the address to connect to the IP router and open the setup page.
Access the DHCP setup menu of the IP router where you can select the DHCP server mode and specify
the start and end address.
Provide the start (192.168.0.100) and end (192.168.0.200) address, respectively.
`
The network settings may differ depending on the IP router.
02489A_SHR-3040_ENG.indb 49
Network
If the start (192.168.0.100) and end address
(192.168.0.200) of the DHCP server are already
specifi ed, provide other addresses (192.168.0.201~192.
168.0.524).
Check if the settings of the gateway and subnet mask match those of the IP router. Check if the settings of the gateway and subnet mask match those of the IP router.
LAN
DSL Modem
MAC ADDRESS
DHCP MODE
IP PORT
IP ADDRESS
GATEWAY
SUBNET
BANDWIDTH
WEB SERVER PORT
IP Router
LAN
SHR-3040
IP SETUP
00-0A-A2-08-08-F3
MANUAL
IP DETECT
50000
192.168.000.200
192.168.000.001
255.255.255.000
HIGH (1.5Mbps↑)
00080
OK
ESC
English _
2009-11-10 오후 2:14:05