Sign in today to find solutions:

Don't have an account? Sign up

 
8 Channel/16 Channel DVR
00769B_SHR-8162_ENG-NEW.indb 1
User's Manual
imagine
the possibilities
Thanks you for purchasing this Samsung product.
To receive a more complete service, please
register your product at
www.samsungsecurity.com
SHR-7080/7082/7160/7162
SHR-8080/8082/8160/8162
2008-12-04 오전 10:13:18

Summary of Contents

  • Page 1

    8 Channel/16 Channel DVR imagine Thanks you for purchasing this Samsung product. To receive a more complete service, please register your product at www.samsungsecurity.com 00769B_SHR-8162_ENG-NEW.indb 1 SHR-7080/7082/7160/7162 SHR-8080/8082/8160/8162 User’s Manual the possibilities 2008-12-04 오전 10:13:18...

  • Page 2

    overview Features This DVR (Digital Video Recorder) employs MPEG-4 video encoding for 8 or 16 channels of camera input and G.723 audio encoding for 16 channels, and supports simultaneous hard disc recording and playback. And also it supports network connectivity, providing remote monitoring from a remote PC by transferring video and audio data.

  • Page 3: Important Safety Instructions

    important saFety instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth.

  • Page 4: Before Start

    overview BeFore start This user’s manual provides Information for using DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, and the like. You have to keep in mind the following notices: SEC retains the copyright on this manual. This manual cannot be copied without SEC’s prior written approval.

  • Page 5

    standards approvals This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 6: Table Of Contents

    overview contents connecting with other device search & pLay _ overview 00769B_SHR-8162_ENG-NEW.indb 6 overview Features Important Safety Instructions Before Start Contents Part Names and Functions (Front) Part Names and Functions (Rear) Remote Control instaLLation Checking the installation environment Rack Installation HDD Addition Connecting the Video, Audio, and Monitor Connecting the Network...

  • Page 7

    00769B_SHR-8162_ENG-NEW.indb 7 weB viewer Introducing Web Viewer Connecting Web Viewer Using Live Viewer Using Search Viewer Viewer Setup About BacKup viewer SEC Backup Viewer appendix Product Specification Product Overview Default Setting 101 Troubleshooting 103 Open Source License Report on the Product English _ 2008-12-04 오전...

  • Page 8: Part Names And Functions (front

    overview part names and Functions (Front) 7080/8080 7160/8160 7082/8082 7162/8162 _ overview 00769B_SHR-8162_ENG-NEW.indb 8 2008-12-04 오전 10:13:28...

  • Page 9

    Part Names LED Indicator Camera Control &/( Direction & Select Button USB Port 1 & 2 MODE AUDIO ALARM MENU/RETURN Channel Jog shuttle OPEN/CLOSE Power 00769B_SHR-8162_ENG-NEW.indb 9 Functions ALARM : Lights on when an event occurs. HDD : Displays the normal access to HDD. Upon access to HDD, LED repeats on and off.

  • Page 10: Part Names And Functions (rear

    overview part names and Functions (rear) 7080/7082 rear 1   7160/7162 rear 8080/8082 rear 1   8160/8162 rear 10_ overview 00769B_SHR-8162_ENG-NEW.indb 10    9 10    9 10    9 10    9 10 2008-12-04 오전...

  • Page 11

    Part Names VIDEO OUT AUDIO OUT HDMI AUDIO IN SATA 1/2 NETWORK SPOT RS-485 ALARM LOOP OUT VIDEO IN AC 100-240V~ IN 00769B_SHR-8162_ENG-NEW.indb 11 Functions Composite Video Signal Output Port (BNC type connector). Audio Signal Output Port (RCA jack). VGA Video Signal Output Port. HDMI connector port.

  • Page 12: Remote Control

    overview remote controL Available after switching to DVR mode by pressing the [dvr] button on the remote control. search Displays the search menu. Changes the screen mode. Displays the Exit pop up screen. numBer [0~ + 10] Used as the numeric input keys, or displays a single skip Backward (by unit time), slow rewind, slow Forward, skip Forward (by unit time)

  • Page 13

    monitor Available after switching to Monitor mode by pressing the [monitor] button on the remote control. Selects the screen status automatically. Selects the screen mode. Turns the monitor power on/off. numBer [0~9] Changes the system ID. Adjusts the audio volume. Displays the Setup Menu....

  • Page 14

    The followings are the recommendations when Samsung DVR is installed on a rack. Please ensure that the rack inside is not sealed. Please ensure the air is circulated through the inlet/outlet as shown in the picture.

  • Page 15: Rack Installation, Hdd Addition

    racK instaLLation Loosen the screws on both sides (4 screws on each side) and install the Bracket-Rack as shown in the fi gure, and then fasten the screws on both sides (4 screws on each side). Fix the screws not to be loosened by vibrations. hdd addition You can install additional HDDs.

  • Page 16

    installation adding a hdd Make sure to unplug the power cord from the wall outlet before proceeding with the installation. Number of HDDs to install : SHR-7082/7162/8082/8162 : Default 1 HDD + Up to 4 HDDs added By factory default, the master unit is equipped with one HDD. The following instructions are when you have installed the maximum number of HDDs on the master unit.

  • Page 17

    When the installation of additional HDDs is done, insert the lower and upper brackets into the DVR and fi x them with the provided screws. When the installation of additional HDDs is done, connect the power cable and connect the HDD signal cables (SATA Cable) to connectors ...

  • Page 18

    installation Install a HDD (x1) on the lower bracket and fi x it with screws. Install HDDs (x3) on the upper bracket and fi x them with screws. When the installation of additional HDDs is done, insert the lower and upper brackets into the DVR and fi x them with the provided screws.

  • Page 19: Connecting The Network

    connecting with other device The following figures are based on Model SHR-8162. connecting the video, audio, and monitor AUDIO OUT VIDEO OUT (composite) connecting the networK connecting to internet through ethernet (10/100/1000Baset) 00769B_SHR-8162_ENG-NEW.indb 19 AUDIO IN VIDEO IN NETWORK USB 2.0 CONSOLE RS-232 SATA...

  • Page 20: Connecting The Usb, Connecting External Sata Hdd

    connecting with other device connecting to internet through adsL connecting the usB There are two USB ports at the front and one at the back of the product. You can connect a USB HDD, USB CD/DVD player, USB memory or mouse to the USB port. If a USB HDD is connected to the system, recognition and settings are available in “menu >...

  • Page 21: Connecting Pos Device, Connecting The Alarm Input/output

    connecting pos device You can connect a POS device to the RS-232C port on the product’s rear side when you connect it directly with a RS-232C cable. Connection setup for the RS-232C port is available in “menu > device > pos devices”, press the <pos device setup>...

  • Page 22: Connecting The Rs-485 Device

    connecting with other device connecting the rs-485 device Connect the RS-485 device through the back port. For example, you can connect and control the PTZ camera which supports the RS-485 communication. Transfer Type : You may select either Half Duplex or Full Duplex as the data transfer type.

  • Page 23: Getting Started

    live getting started starting the system Connect the power cable of the DVR to the wall outlet. Press the Power button on the front panel. You will see the initialization screen. The initialization process will last about 1 minute in the order of icons appeared.

  • Page 24

    live Login To access a DVR or restricted menu, you should have logged in to the DVR. In live mode, right-click any area of the screen. You will see the context sensitive menu as in the right fi gure. Click <Login>. The login dialog appears.

  • Page 25

    Live screen conFiguration icons on the Live screen You can check the status or operation of the DVR with the icons on the live screen. CAM 01 Name Current Date, Time Login Information Screen Mode System Operation Video Input Status Camera Name/ Channel Camera Operation 00769B_SHR-8162_ENG-NEW.indb 25...

  • Page 26

    live error information If you turn on the system in the condition that the internal HDD is not connected or an error occurs, the “HDD FAIL” icon ( ) will be displayed on the top left corner. In this case, make sure you contact the service center for assistance as this may cause a failure of recording, playback or backup.

  • Page 27

    Menu Scene Mode SPOT OUT Audio On/Off Freeze Stop Alarm Record/Stop Play Search Backup Main Menu Shutdown Launcher Show/Hide Login/Logout single mode menu The single mode menu is available only in the Single mode. The context sensitive menu of the One Channel mode in Split mode is different from that of the Single mode. Full Screen PTZ Control ZOOM...

  • Page 28

    live view the Launcher menu You can use the Launcher menu appearing on the bottom of the live screen to access it. In Live mode, right-click to display the context menu and select <Launcher show>. Move the cursor to the bottom and click a desired item in the Launcher menu.

  • Page 29: Live Mode

    Live mode SHR-7160/7162/8160/8162 display Live images from 16 channels in a total of 8 layout of split screens. switching the screen mode To switch the split mode, select a screen mode in the launcher menu, or right-click to select a screen mode in the context menu.

  • Page 30

    live manual switching Press the left/right button on the front panel or the remote control, or click the arrow <_/+> key to move to the next split mode. If pressing the right [+] button in 9-split mode: 9-split (CH 1~9) mode  9-split (CH 10~16) mode  Auto Sequence CH10 CH11 CH12...

  • Page 31: Spot Out

    CH13 CH14 CH15 CH16 switching to single mode In a split mode, select and double-click a desired channel to switch to its Single mode. Press the number corresponding to a desired channel on the front panel or the remote control to switch to its Single mode.

  • Page 32: Zoom, Audio On/off, Freeze

    live Zoom This is available only in Single Live mode. In Single mode, select a desired area and use the Zoom function to enlarge it twice. Select <Zoom> in the right-click menu. Press the [Zoom] button on the front panel or the remote control, or simply click < menu.

  • Page 33: Event Monitoring

    CH12 CH13 CH12 CH13 event monitoring This will display the channel in sync with a specific event (Sensor/Motion/Video Loss) if it occurs. In “monitor>event display”, set the event monitoring to ON/OFF and specify the event display time. (Page 46) If multiple events occur simultaneously, the screen will switch to a split mode. - 2~4 events: 4-split mode - 5~9 events: 9-split mode - 10~16 events: 16-split mode...

  • Page 34

    using the DVR You can setup the system properties, devices, and options for recording, event, backup and network. system setup You can setup Date/Time/Language, Permission, System Properties and Log. date/time/Language You can check and setup the current Date/Time and time related properties, as well as the language used for the interface on the screen.

  • Page 35

    - Time Server: Enter an IP or URL address of the time server. - Last Sync Time: Displays the most recent synchronization time from the selected time server. - Activate as Server: Set to <use> to allow the DVR to act as a Time Server for other DVRs.

  • Page 36

    using the DVR permission management You can set permissions of each user over the DVR's specifi c function and settings. setting the administrator You can set and change Administrator’s ID and password. The administrator can use and set all menu items and functions. Using the mouse may help easy setup.

  • Page 37

    setting the group You can create a user group, and setup permissions of a user group. You can register a user for each group in <user>. Using the mouse may help easy setup. Use the up/down buttons (▲▼) in <system> window to move to <permission management>, and press [enter] button.

  • Page 38

    using the DVR setting permissions You can set restricted access for all general users. Items with restrictions will require logging in for use. Using the mouse may help easy setup. Use the up/down buttons (▲▼) in <system> window to move to <permission management>, and press [enter] button.

  • Page 39

    Updating the Software Connect a device storing the software to be updated. (It may take about 10 seconds to recognize the device.) You can use a USB memory or CD/DVD for updating. Select <system management> from <system> window. Select <system information>. When the recognized device appears, select <upgrade>.

  • Page 40

    using the DVR settings You can copy and import the DVR settings by using a storage media. Using the mouse may help easy setup. Use the up/down buttons (▲▼) in <system> window to move to <system management>, and press [enter] button.

  • Page 41: Setting The Device

    event Log Event log shows recorded events on alarms, motion detections and video loss. It also shows the log and its timestamp. Using the mouse may help easy setup. Use the up/down buttons (▲▼) in <system> window to move to <Log information>, and press [enter] button. Select <event Log>.

  • Page 42

    using the DVR Audio - If set to <on>, you can turn the audio of the channel ON/OFF on the Live screen. - If set to <oFF>, the channel’s audio is off on the Live screen and not recorded. Audio output is available for only 1 channel. CH Name : Up to 15 characters including blanks are allowed.

  • Page 43

    storage device You can check information on storage devices. confi rming devices You can check storage devices and their free space, usage as well as status. Devices available are HDD, and USB devices (memory, HDD, CD/DVD). Refer to “product specifi cations > Backup”. (Page 96) Using the mouse may help easy setup.

  • Page 44

    using the DVR Select <Format> on the bottom of the screen. Press <oK> on the “manage” confi rmation window will start formatting the selected device. When the formatting is done, press <oK>. hdd alarm You can set alarm settings for HDD defects such as Check Alarm Output Port, Replace Alarm Output Port, and its duration.

  • Page 45

    remote devices You can set the RS-485 communication for use of PTZ Camera and system keyboard with the DVR. Using the mouse may help easy setup. Use the up/down buttons (▲▼) in <device> window to move to <remote device>, and press [enter] button. Use direction buttons (▲▼_ +) to move to the desired item, and press [enter] button.

  • Page 46

    using the DVR CH : Select the camera to be synchronized to the POS device. If selected a channel input fi eld, “Sync Channel Setup” window appears. One POS device and be synchronized up to 16 cameras (channels), and a channel can not be synchronized to multiple POS devices.

  • Page 47

    setting the spot out You can set the DVR to output information / video apart from the monitor out. Using the mouse may help easy setup. Use the up/down buttons (▲▼) in <device> window to move to <monitor>, and press [enter] button. Select <spot out>.

  • Page 48: Setting The Recording

    using the DVR setting the recording You can setup scheduled recording, event recording and other recording related settings. recording schedule Make your reservation on a date and time to schedule the recording on specifi ed time. Using the mouse may help easy setup. Press the [menu] button on the remote control or front panel.

  • Page 49

    recording color tags color White Orange Blue Green Each press of a selected cell will cycle through <no recording>-<continuous>-<event>- <Both(cont&evnt)>. event record duration You can set the beginning and ending point of a recording on an event. Using the mouse may help easy setup. Use the up/down buttons (▲▼) in <record>...

  • Page 50

    using the DVR setting event recording properties You can set each channel’s resolution, quality and IPS for event recordings. Using the mouse may help easy setup. Use the up/down buttons (▲▼) in <record> window to move to <rec Quality & resolution>, and press [enter] button.

  • Page 51: Setting The Event

    Disk End Mode : If selected <overwrite>, recording will continue despite the HDD full while overwriting the oldest. If selected <stop>, the recording will stop when the HDD is full. Disk End Beep : If selected <stop>, the button is activated. If you check it, the beep will sound on the disk full and the recording stops.

  • Page 52

    using the DVR Alarm : Sets the alarm output method. For further information on alarm output, refer to “HDD Alarm > Alarm”. (Page 44) Duration : Sets the duration of alarm signal and alarm sound. When the sensor detection setup is done, press <oK>. motion detection You can set target detection region and motion, as well as the alarm signal output.

  • Page 53

    video Loss detection You can set the alarm to be generated on a camera disconnection, which causes a video loss. Using the mouse may help easy setup. Use the up/down buttons (▲▼) in <event> window to move to <video Loss detection>, and press [enter] button.

  • Page 54: Backup

    (such as Windows Media Player) on a PC. - DVR : Saved data can be played back only by the DVR. - SEC : Saves data in the Samsung’s proprietary format with built-in viewer, which supports immediate playback on a PC.

  • Page 55: Network Configuration

    When the backup setup is done, press <oK>. If no available device is recognized for backup, <OK> button is not activated. The application may slow down during the backup. When a CD/DVD or memory device is used for backup, it is not available to use the full capacity of the media since the system consumes a part of its capacity.

  • Page 56

    using the DVR IP, Gateway, Subnet Mask, and DNS - For <static ip> : You can directly input IP address, Gateway, Subnet Mask and DNS. - For <dynamic ip> : IP address, Gateway, and Subnet Mask are set automatically. - For <adsL> : IP address, Gateway, and Subnet Mask are set automatically.

  • Page 57

    <ddns>, and press [enter] button. Use virtual keyboard to enter user inputs. Refer to “Using Virtual Keyboard”. (Page 36) If selected <OFF> or <Samsung DDNS>, input fi elds are deactivated. When the DDNS setup is done, press <oK>.

  • Page 58

    using the DVR when a router is used To avoid IP address confl ict with the DVR's static IP, check followings: setting the dvr with a static ip - Internet connection : You can connect the DVR to a router which is connected to an ADSL/Cable modem or a router in a Local Area Network (LAN) environment.

  • Page 59

    Set <protocol type> in the <protocol> menu of the connected DVR to the following: Ex) Protocol Type : TCP Port (TCP) : 0554,0555,0556,0557 DDNS Site : Samsung DDNS ddns settings of the router Select the corresponding menu for the network transfer protocol of the router.

  • Page 60

    using the DVR mailing service You can send an e-mail to a DVR-registered user at a specifi c time interval, or if an event occurs. smtp setting Sets the SMTP mail server. Using the mouse may help easy setup. In the <network> setting window, press the up/down (▲▼) button to move to <mailing service>...

  • Page 61

    group setting You can set the group to whom the e-mail is sent, and specify the permission for each group. You can add recipients for each group in the <recipient> menu item. The recipient is set separately from the DVR user group. Using the mouse may help easy setup.

  • Page 62: Controlling A Ptz Device

    Pattern : Makes the PTZ camera remember and follow the past route. The functions of Auto Pan, Scan and Pattern are supported in the protocols of Samsung, Panasonic and Pelco, and are different in terms of the name and setting, depending on the protocols of Samsung, Panasonic and Pelco.

  • Page 63

    The camera-specifi c menu appears. You can confi gure the settings of only those cameras that support the protocols of Samsung and Panasonic. If you are setting Auto Pan or Pattern in the camera menu, press and hold the appropriate button for a certain time so that the button operation can be different from that in normal PTZ setting.

  • Page 64

    search & play search You can perform the search for recorded data by the time or by the search criteria such as an event. You can access the <search> menu directly in Live mode. In Live mode, right-click any area of the screen. The Live menu appears.

  • Page 65

    Zoom Out : The map enlarges in detail. It will switch in the sequence of 24 hours-4 hours -1 hour -5 minutes. Zoom In : The map will switch in the reverse order of the detailed mode above. It will switch in the sequence of 5 minutes-1 hour -4 hours - 24 hours.

  • Page 66

    search & play pos search You can search for data in the POS device that is connected to the DVR. You can use the mouse to select the related items. Select <pos search> in the <search> menu. Use direction buttons (▲▼_ +) to set the search criteria and press the [enter] button.

  • Page 67: Playback

    pLayBacK play You can play data stored in the HDD and backup a desired portion of the data. Using the mouse may help easy setup. In Live mode, click <play> in the right-click menu or < > in the launcher menu, or press the Play button on the remote control or the front panel.

  • Page 68

    web viewer introducing weB viewer what is web viewer? Web Viewer allows remote access to your DVRs. You have access to live video, archived video, PTZ control (if configured), etc. product Features Remote access from a standard browser Supports PTZ camera controls Supports 1, 4, 8, 16 camera viewing formats (maximum of 16 cameras in the list).

  • Page 69

    connecting weB viewer Open your web browser and type the IP address or URL of DVR into the URL address box. The basic URL of the DVR is as following in case of MAC address: 00-00-F0-ab-cd-ef : nabcdef.websamsung.net 00-16-6c-ab-cd-ef : mabcdef.websamsung.net 00-68-36-ab-cd-ef : pabcdef.websamsung.net You can also use registered URL which setups up in the Setup menu of your DVR.

  • Page 70

    web viewer Click <install>. You may have “windows security alert” that attempts to block this with the Windows Firewall. In that case, click <unblock> to start Web Viewer. Installation is complete. Now you can see the main screen of Live Viewer. 0_ web viewer 00769B_SHR-8162_ENG-NEW.indb 70 2008-12-04 오전...

  • Page 71

    using Live viewer The Live Viewer screen consists of following : This displays the IP address and the model name of the connected DVR. These menus consist of <Live>, <search>, <setup>, <aBout>. These buttons are used for the screen split and full screen mode. Shows the IP address and model name of the connected DVR.

  • Page 72

    web viewer osd inFormation dispLay The channel number, video size, and IP address of the connected DVR are displayed. The current date and time of the DVR are displayed. Alarm icon appears when alarm is issued. It disappears when pressed the [aLarm] button of the DVR. Motion icon appears when motion is detected.

  • Page 73

    connected dvr This displays the IP address and the status of the connecting DVR. Connection failure message No Response : Appears when the DVR does not respond. Collision : Appears when Admin mode is already in use or simultaneous access to the same DVR from another PC. Access Denied : Appears when the maximum number of users is exceeded.

  • Page 74

    Live screen on the pc capture: Saves the current screen into a BMP or JPEG fi le. The default saving path is “C:\Program Files\Samsung\Dvr Web Viewer\SnapShot\Live”. To change the saving path, click <SAVE PATH ( )> button and then select the path you want.

  • Page 75

    Saves the current image on the screen and saves it as a avi video fi le. To record it, it is required at least 1GB of available space. The default saving path is “C:\Program Files\Samsung\Dvr Web Viewer\VideoClip\Live”. To change the saving path, click <SAVE PATH ( want.

  • Page 76

    Upward dragging will zoom out, while downward dragging will zoom in. Tilt of Power PTZ operates properly within 45°. Power and Pan Tilt functions are only available for camera supporting the functions. Ex: Samsung SCC-C6475 _ web viewer 00769B_SHR-8162_ENG-NEW.indb 76...

  • Page 77

    using search viewer The Search Viewer screen consists of following: This displays the IP address and the model name of the connected DVR. These menus consist of <Live>, <search>, <setup>, <aBout>. These buttons are used for the screen split and full screen mode. Shows the IP address and model name of the connected DVR.

  • Page 78

    web viewer spLit-screen You can change the split mode by clicking each number icon. SINGLE MODE Click < > button. The screen displays the selected camera connected to the DVR in “singLe mode”. Click < > button. The screen displays the selected camera connected to the DVR in “Quad mode”.

  • Page 79

    The default saving path is “C:\Program Files\Samsung\Dvr Web Viewer\VideoClip\Search”. To change the saving path, click <SAVE PATH ( “C:\users\(user ID)\AppData\LocalLow\Samsung\DVR Web Viewer\Video-Clip\” and it cannot be modifi ed. The fi le is automatically named as following: “IP address_Port number_YYMMDD_camera number_index” Ex) 192.168.130.12_554_20070615_101530_01_00 For AVI save, you need the DivX codec for playing saved fi les.

  • Page 80

    web viewer searching the recorded video in the caLendar If the video data has been recorded on a date, the date is distinguished in green. If you click the date, the recorded video information is displayed in the time line. When you click <today>, it is changed to today’s date.

  • Page 81

    controLLing pLayBacK Fast Backward: Reverse-plays faster(2x). reverse play: Performs Reverse Play. play: Performs playback. Fast Forward: Plays faster(2x). go to First: Moves the beginning time of recorded video in the time line. step Backward: Performs one step reverseplay by one frame. stop: Stops playing.

  • Page 82

    web viewer Time Synchronization Setup Set the time synchronization. display Date Format : Set the date type. Time : Select a time format to display on the screen. dst (daylight saving time) DST is displayed an hour ahead of the standard time of the time zone.

  • Page 83

    group Users are classifi ed into groups and the permission can be set according to the group. First of all, add a group. user You can add, change or remove a user or users. setup You can set the user permission. system management For more information, refer to <system management>...

  • Page 84

    web viewer device You can check a list of devices that are connected to the DVR and confi gure the necessary settings. Click <device> in the menu screen. For more information, refer to <device setup>. (Page 41) camera camera You can confi gure the settings of the camera that is connected to the DVR.

  • Page 85

    hdd alarm You can set the alarm output channel and the alarm duration for an error. remote device You can see a list of remote devices including PTZ cameras and system keyboards that are connected to the RS-485 port of the DVR and confi gure the necessary settings. pos device You can set the channel, preset and communication port of the POS device that is connected to the DVR.

  • Page 86

    web viewer SPOT OUT The registered user can view the event screen for the duration set in <event display time> if an event occurs from the appropriate channel. mode You can switch between live mode and play mode. record For more information, refer to <setting the recording>. (Page 48) recording schedule If you set a recording schedule for a specifi c date and time, the recording will start at that specifi c time.

  • Page 87

    event record duration You can set the start and end times of recording that will be activated if an event occurs. rec Quality & resolution standard/event You can set the resolution, frame rate and recording quality for each channel. record option You can set the Disk End Mode.

  • Page 88

    web viewer motion detection You can set the motion detection mode and the sensitivity as well as the alarm output type and the duration. motion area Set the target motion detection area video Loss detection You can set the alarm output time if a video loss occurs. alarm schedule You can schedule the alarm output according to the day of the week and the time.

  • Page 89

    network For more information, refer to <network confi guration>. (Page 55) connection A remote user can access the DVR via the network to check the current mode and the IP address. connection You can set the network connection route. protocol You can confi gure the protocol related settings.

  • Page 90

    web viewer mailing service You can specify the SMTP server that sends a mail if an event occurs and set the recipient group and users. smtp You can set the server that sends mails and specify if you use the authentication process. event You can set the event interval and specify which events the server sends mails for.

  • Page 91

    aBout Click <aBout>. Displays the model name of connected DVR and the version of Web Viewer. English _91 00769B_SHR-8162_ENG-NEW.indb 91 2008-12-04 오전 10:16:58...

  • Page 92

    backup viewer sec BacKup viewer You can play a fi le that is backed up in the format of SEC. Backup in the format of SEC will involve in generating two fi les: one for the backup data and one for the viewer. If you run the backup fi le viewer, the backup data fi le will be automatically played.

  • Page 93

    Name Audio Screen Printout File Tamper Detection Zoom In/Out Display of storage time range Speed Play 00769B_SHR-8162_ENG-NEW.indb 93 Description A toggle button. Each time you press this button, the audio output will toggle between activated and deactivated. You can adjust the volume level from 0 to 100. Saves the current screen as an image file.

  • Page 94

    appendix product speciFication Item Operating System Broadcast Format Input Voltage Power Consumption Video In Video Video Out Audio In Audio Audio Out Resolution & Frame Rate Live Screen Display Mode 9_ appendix 00769B_SHR-8162_ENG-NEW.indb 94 Details Embedded OS NTSC/PAL System AC 100~230V (PAL) AC 110~220V (NTSC) SHR-816x : 60W SHR-808x : 56W...

  • Page 95

    Item Compression Method Resolution & Quality Record Record Mode Frame Rate Internal Storage External Search Mode Play Resolution & Specification 00769B_SHR-8162_ENG-NEW.indb 95 Details Video : MPEG4 Audio : G.723 Resolution Spec. (Quality) Max Recording Rate CIF(S) Level8 (high) 480(240)ips(NTSC)/ 352X240(NTSC) ~ Level1 (low) 400(200)ips(PAL) /352X288(PAL)

  • Page 96

    -20°C ~ 60°C (-4°F ~ 140°F) 20% to 85% RH 20% to 85% RH 440 x 88 x 430mm (17.32 x 3.46 x 16.92 inch) SHR-8162/7162 : ~7.55Kg(16.64lb) SHR-8082/7082 : ~7.42Kg(16.35lb) SHR-8160/7160 : ~6.70kg(14.77lb) SHR-8080/7080 : ~6.57Kg(14.48lb) Note 2008-12-04 오전 10:17:02...

  • Page 97

    product overview shr-8162 English _9 00769B_SHR-8162_ENG-NEW.indb 97 2008-12-04 오전 10:17:18...

  • Page 98

    appendix deFauLt setting This returns the factory default settings. The settings are made as follows; Use System/Load Factory Default in MENU In Live mode, press and hold down [mode] and then [ptZ] on the front panel for 6 seconds to reset the settings. Category Date/Time/Language System Settings...

  • Page 99

    Category POS Device Device Monitor Recording Schedule Event Record Duration Quality/Resolution Record Option Recording Event 00769B_SHR-8162_ENG-NEW.indb 99 Details Display Switch to Split Screen Monitor HDMI SPOT OUT 1 SPOT OUT 2 SPOT OUT SPOT OUT 3 SPOT OUT 4 Event Display Live Mode Mode Play Mode...

  • Page 100

    appendix Category Connection Mode DDNS Network Live Transfer Mailing Service 100_ appendix 00769B_SHR-8162_ENG-NEW.indb 100 Details Connection Mode Bandwidth Connection Gateway Subnet Mask Protocol Type Protocol Port (TCP) Webviewer Port DDNS Site Resolution Quality Server Port SMTP Use Authentication Secure Transfer Group Group Recipient Permission...

  • Page 101

    trouBLeshooting Symptom The system does not turn on and the indicator on the front panel does not work at all. Some channels display just a black screen even if they receive video sources. If I press the [REC] button on the front panel, the REC indicator does not flash, nor the player start recording.

  • Page 102

    appendix Symptom A message of “Need to reset date/time.” Is displayed on the screen. The time bar is not displayed in Search mode. The “NO HDD” icon and an error message are displayed. I have installed an additional HDD on the DVR but it does not recognize the HDD.

  • Page 103

    open source License report on the product This product uses software provided under the name of GPL and LGPL. You can receive the following GPL and LGPL source codes by email request to www.sec.co.kr.  GPL Software : linux kernel, Sysvinit, dosfstols, wget, msmtp, busybox, cdrtools, dvd+rw-tools, iconv, smartctl, uboot, minicom, openssl, bash, lm_sensors  LGPL Software : glibc, vmstat, inetutils  OpenSSL License : OpenSSL...

  • Page 104

    Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1.

  • Page 105

    not have their licenses terminated so long as such parties remain in full compliance. . You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works.

  • Page 106

    INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY...

  • Page 107

    For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.

  • Page 108

    The “Corresponding Source” for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the work's System Libraries, or general- purpose tools or generally available free programs which are used unmodified in performing those...

  • Page 109

    users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate. 6. conveying non-source Forms. You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this...

  • Page 110

    in source code form), and must require no special password or key for unpacking, reading or copying. 7. additional terms. “Additional permissions” are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under...

  • Page 111

    10. automatic Licensing of downstream recipients. Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License.

  • Page 112

    and any other pertinent obligations, then as a consequence you may not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program.

  • Page 113

    intended to guarantee your freedom to share and change free software to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packages--typically libraries--of the Free Software Foundation and other authors who decide to use it.

  • Page 114

    A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The “Library”, below, refers to any such software library or work which has been distributed under these terms.

  • Page 115

    above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code.

  • Page 116

    based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above.

  • Page 117

    no warranty 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY “AS IS”...

  • Page 118

    openssL License * Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved. * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

  • Page 119

    * 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: “This product includes cryptographic software written by Eric Young (eay@cryptsoft.com)” The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic related :-).

  • Page 120

    Correct Disposal of This Product (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: