Backup - Samsung SHR-3040 User Manual

setup
. Use the up/down ($%) button to move to a desired item.
SWITCHING INTERVAL: Specify the switching interval
~
for the spot monitor.
ALARM POPUP: Set to display a popup if a alarm signal
~
is detected.
MOTION POPUP: Set to display a popup if a motion
~
signal is detected.
EVENT POPUP DURATION: Specify the event popup
~
duration.
. When done, select <OK>.
Your setting will be applied.
If you select <DeFault>, the settings will be restored to the factory default.
. To return to the previous menu, select <esc>.

BacKuP

You can backup HDD recording data on a USB storage device.
Backup
1. Press the [meNu] button on the front panel or remote
control.
The "Dvr lOG-iN" dialog appears.
. Enter the password and select <eNter>.
The "maiN meNu" screen appears.
. Use the up/down ($%) button to select <BacK-uP>, and
press [OK].
The "BacK-uP" screen appears.
. Connect the USB device and select <cHecK usB>.
A device list of the search results will appear with device
information.
_ setup
02489A_SHR-3040_ENG.indb 42
SPOT SETUP
SWITCHING INTERVAL
ALARM POPUP
MOTION POPUP
EVENT POPUP DURATION
DEFAULT
MAIN MENU
DISPLAY SETUP
RECORD
CONFIGURATION
EXTERNAL DEVICE
BACK-UP
FIRMWARE UPGRADE
FACTORY DEFAULT
LANGUAGE
SHUTDOWN
BACK-UP
HDD
START 2009/ 05/01
END 2009/ 05/01
MEDIA
PARTITION
START /
END
SIZE MB
CHECK USB BACK-UP
03 SEC
OFF
OFF
05 SEC
OK
ESC
ENGLISH
EXIT
00:00:06
00:00:20
/ : :
-> MB
ESC
2009-11-10 오후 2:13:58