1. Manuals
  2. Brands
  3. Samsung Manuals
  4. DVR
  5. SHR-2080
  6. User manual

Samsung SHR-2080 User Manual

Hide thumbs Also See for SHR-2080:
Table of Contents

Advertisement

Quick Links

Real Time DVR
SHR-2160/2162/2080/2082 User's Manual
English

Advertisement

Table of Contents
loading

Related Manuals for Samsung SHR-2080

Summary of Contents for Samsung SHR-2080

  • Page 1 Real Time DVR SHR-2160/2162/2080/2082 User’s Manual English...

  • Page 2: Table Of Contents

    Contents Safety Regulations Chapter 5 Menu Setup Before Use Before we start 1. System 5-12 2. Camera Standards Approvals 5-16 3. Monitoring 4. Recording Mode 5-18 Chapter 1 Overview 5-21 5. Event Record Mode 1. Introduction 5-25 6. Record Schedule 2.

  • Page 3: Safety Regulations

    Safety Regulations Please be sure to keep the following in mind for the right use of the product to pre-vent proprietary risk or damage. Chapter 9 Smart Viewer Do not use multiple plugs at once. This may cause abnormal heat generation or fire 1.

  • Page 4: Before We Start

    SHR-2160/2162/2080/2082 USER’S MANUAL Before we start This User’s Manual describes the basic usage of SHR-2160/2162/2080/2082. This Manual contains all the matters necessary for using SHR-2160/2162/2080/2082 such as brief instruction, part name, function, connecting other equipment, and menu setup of SHR-2160/2162/2080/2082. SEC retains the copyright on this User’s Manual.

  • Page 5: Introduction

    NTSC / PAL Video Source Compatible audio inputs into ADPCM data audio file in the real time to record them in the Hard Disk or ( NTSC : SHR-2162, SHR-2160, SHR-2082, SHR-2080 retrieve them from the Hard Disk simultaneously. SHR-2162N, SHR-2160N, SHR-2082N, SHR-2080N...

  • Page 6: Part Names And Functions

    SHR-2160/2162/2080/2082 USER’S MANUAL Name Function Part Names and Functions Displays the play screen of one channel and the live screen (small) of another channel as a PIP screen. Displays one channel play screen and MODE Split Screen an 8-channel live screen. Displays one channel play screen and Selection Button Mode...
  • Page 7 8-channel live screen. AUDIO Audio Setup Sets the Audio On/Off. Button ALARM Alarm Setup [SHR-2080] Cancels the alarm when the Alarm button is selected. Button PTZ Button Sets PTZ mode(ON/OFF). ZOOM ZOOM(TELE) Sets digital zoom (x2) on single screen.
  • Page 8 Network Connection Port Sets PTZ mode(ON/OFF). - ALARM IN 1~16 (SHR-2160/2162) : Alarm Input Port Confirms system and remote control ID and - ALARM IN 1~8 (SHR-2080/2082) : Alarm Input Port SYS ID changes the remote control ID. (For how to ALARM...

  • Page 9: Chapter 2 Installation

    SHR-2160/2162/2080/2082 USER’S MANUAL - Remote Control Setup : From the setup menu: System Remote Control Device Remote Control : On/Off - System ID Setup : From the setup menu : System Remote Control Device System ID Footnote 1. How to operate the number keys (channel select) Channel How to operate the keys Channel 1...

  • Page 10: Installation Environment Setup

    Remote Control Unit (R.C.U) 8. For the products with an input ground, use a power plug that has a ground. Main Body Main Body SHR-2160 SHR-2162 Main Body Main Body SHR-2080 SHR-2082 Bracket Power Cord User’s Manual Screw RS-485/Alarm Remote...

  • Page 11: Hdd Addition

    SHR-2160/2162/2080/2082 USER’S MANUAL HDD Addition 2. Remove the cover from the product. (Remove the cover by first lifting its back part upward SHR-2160/2080 HDD after sliding the cover slightly backward.) The user can add up to 3 HDDs to this product. However, there are many factors that can cause electrical shock, accidents, and malfunctioning of the device inside of the product.
  • Page 12 SHR-2160/2162/2080/2082 USER’S MANUAL 3. There is a bracket (bracket-HDD) mounted on the right and left sides where you can mount 4. Remove the bracket-HDD from the product by separating the power supply cable, signal the HDD, and you have to remove the screws that are holding the bracket that you want to transmission cable (IDE cable), and fan cable then pulling it toward the center of the product mount an HDD onto.
  • Page 13 SHR-2160/2162/2080/2082 USER’S MANUAL 5. When mounting an additional HDD, the primary master has to be mounted. 7. Make sure that the bracket-HDD is mounted stably inside of the product, then connect the Mount the HDD you want to add after setting the master/slave jumpers in the proper order. power supply cable, signal transmission cable (IDE cable), and fan cable to the HDD.
  • Page 14 SHR-2160/2162/2080/2082 USER’S MANUAL 2. Remove the cover from the product. (Remove the cover by first lifting its back part upward SHR-2162/2082 HDD after sliding the cover slightly backward.) The user can add up to 2 HDDs to this product. However, there are many factors that can cause electrical shock, accidents, and malfunctioning of the device inside of the product.
  • Page 15 SHR-2160/2162/2080/2082 USER’S MANUAL 3. There is a bracket (bracket-HDD) mounted on the right and left sides where you can mount 4. Remove the bracket-HDD (A) from the product by separating the power supply cable, signal the HDD, and you have to remove the screws that are holding the bracket that you want to transmission cable (IDE cable), and fan cable then pulling it toward the center of the product mount an HDD onto.
  • Page 16 SHR-2160/2162/2080/2082 USER’S MANUAL 5. When mounting an additional HDD, the primary master has to be mounted. In general, HDD should be installed as the primary master of IDE, and the CD-RW drive should be installed as the secondary master of IDE. Mount the HDD you want to add after setting the master/slave jumpers in the proper order.

  • Page 17: Chapter 3 Connecting With Other Devices

    SHR-2160/2162/2080/2082 USER’S MANUAL Primary HDD Secondary HDD Chapter 3 Connecting with 8. Check if there is any problem with connector or wiring inside of the product for connecting and mounting then close the cover. 9. Tighten cover mounting screws. (The left and right side each has 5 spots and back side ha s1 spot) other devices Caution...
  • Page 18 SHR-2160/2162/2080/2082 USER’S MANUAL Connecting the Video, Audio, and Monitor [SHR-2160/2162] [SHR-2080/2082] English English...

  • Page 19: Connecting The Network

    SHR-2160/2162/2080/2082 USER’S MANUAL Connecting the Network Connecting to Internet through Ethernet(10/100BaseT) Connecting to Internet through Ethernet(10/100BaseT) [SHR-2160/2162] [SHR-2080/2082] Connecting to Internet through ADSL Connecting to Internet through ADSL [SHR-2160/2162] [SHR-2080/2082] English English...

  • Page 20: Connecting The Usb

    SHR-2160/2162/2080/2082 USER’S MANUAL Connecting the USB Connecting the Alarm Input/Output 1. There are two USB connecting ports, on the front and other on the back of The Alarm IN/OUT port in the back of SHR-2160/2162 is composed of the following SHR-2160/2162/2080/2082.
  • Page 21 SHR-2160/2162/2080/2082 USER’S MANUAL ALARM IN/OUT Connection The Alarm IN/OUT port in the back of SHR-2080/2082 is composed of the following elements. ALARM IN/OUT Connection Name Function - ALARM IN1 - ALARM IN2 - ALARM IN3 - ALARM IN4 - ALARM IN5...

  • Page 22: Connecting The Rs-485 Device

    Connecting the RS-485 Device Connect the RS-485 Device through the back port of SHR-2160/2162. Connect the RS-485 Device through the back port of SHR-2080/2082. You can install and control the PTZ camera supporting the RS-485 communication. You can install and control the PTZ camera supporting the RS-485 communication.

  • Page 23: Chapter 4 Live

    Chapter 4 Live English...

  • Page 24: System Operation

    SHR-2160/2162/2080/2082 USER’S MANUAL System Operation Live screen Mode Turn the power on and the following LOGO pops up on the screen. Definition of Live Screen Icon The Live screen icons display the current setup and function status of each screen. V.Loss CAM_01 CAM_01...
  • Page 25 SHR-2160/2162/2080/2082 USER’S MANUAL Selecting Live Screen Mode : Auto sequence Icon This icon appears in the auto sequence mode. Each mode may be selected by [MODE Button] and [CH1 ~ CH16 Button] : Backup Playback Icon The following figure shows Live Mode of SHR-2160 after converted. This icon appears when the backup data is played.

  • Page 26: Live Channel Selection And Audio On/Off Setup

    SHR-2160/2162/2080/2082 USER’S MANUAL Freeze and Zoom Live Channel Selection and Audio On/Off Setup In other split modes than Full Screen Mode and Auto Sequence Mode, you can choose a channel Freeze Function to be displayed in each split area on your own. In addition, the channel being set to Audio On can Freeze function pauses the video image in the Live Screen, it is only available in the Live Mode.

  • Page 27: Event Monitoring

    SHR-2160/2162/2080/2082 USER’S MANUAL Spot-out monitoring Event Monitoring Event monitoring displays the channel synchronized with a event on the screen when a special Spot-out Monitoring has nothing to do with Live Screen Output, it monitors the full screen of a certain channel. If you select the Monitoring in the MENU, the one channel among CH1 ~ CH16 event (Sensor/Motion/Video Loss) occurs.

  • Page 28: Chapter 5 Menu Setup

    Chapter 5 Menu Setup English...

  • Page 29: Before Use

    SHR-2160/2162/2080/2082 USER’S MANUAL Before Use System Selection Date/Time/Language Setup The yellow cursor shows the current window. Use the œ,ƒ,¦, ‹ key in the front to move the cursor to desired menu. If you press the “Enter” key with the cursor clicking on your desired menu, the system will enter the new mode.
  • Page 30 SHR-2160/2162/2080/2082 USER’S MANUAL Password Note Note [Date/Time Change] Pressing “OK” after you change date and time, you will be asked by a pop-up window if you really confirm the change. Here, press ”Yes” to change the time. Since Date/Time does not change in backup process, be sure to stop the backup process before you change Date/Time.
  • Page 31 SHR-2160/2162/2080/2082 USER’S MANUAL System Log List Load Factory Default System Start Starts the system. Time Change Changes the Date/Time. Login(Admin) Viewer Login (Admin) Load Factory Default Initializes the system. Logout(Admin) Viewer Logout (Admin) System Upgrade Changes the system S/W. Login(User) Viewer Login (User) Disk Full No Space in the HDD...
  • Page 32 SHR-2160/2162/2080/2082 USER’S MANUAL System Information and Setup Caution Caution [Device Erase] Data will not be deleted in the backup mode. Please be sure to stop the backup before you delete a data. In the recording mode, suspend the recording and delete a data. Caution Caution [USB S/W Upgrade]...
  • Page 33 SHR-2160/2162/2080/2082 USER’S MANUAL HDD Mode Setup Remote control Device MENU for the use of Samsung system keyboard Device A Remote Control Device, being connected to the RS485 port. HDD End Mode Stop : Stops recording when HDD is full during the recording.

  • Page 34: Camera

    SHR-2160/2162/2080/2082 USER’S MANUAL Camera The detailed Camera Menu items are as follows. System Shutdown Remote Control Device Terminates the work in action safely and turns the power off. Press “OK” in the confirmation Camera Config. window and plug out when you see “Safe to Power Off”. Caution Caution [System Shutdown]...
  • Page 35 Protocol It is supported by the PTZ device. The following protocols are now being supported. Samsung / Vic. / Pan. / AD / Phi. / Ern. / Pel-D / Pel-P / Vcl. / Dia. / Kal. Baurate Auto Sequence Baurate is supported by the PTZ device. 600 / 1200 / 2400 / 4800 / 9600 / 19200 / 38400 You are allowed to set the duration of each channel at the Auto Sequence channel in the Live Mode.

  • Page 36: Monitoring

    SHR-2160/2162/2080/2082 USER’S MANUAL Monitoring Screen Setup Event Monitoring It is possible to set to Off / 3sec / 5sec / 10sec / 20sec / 30sec / Continuous. Off : Event Monitoring does not operate to turn to the screen where an event occurs. 3sec / 5sec / 10sec / 20sec / 30sec : Sets the duration time of screen in the Auto It is a window to set Brightness/Contrast/Color for the camera image of each channel.

  • Page 37: Recording Mode

    SHR-2160/2162/2080/2082 USER’S MANUAL Recording Mode Image output Record mode You are not allowed to connect VGA OUT and Composite/S-Video OUT simultaneously. Record mode menu’s detailed list is as follows. In other words, the user must choose either VGA output or composite/S-video output. Composite : Makes the output come out through the “Composite / S-Video OUT”...
  • Page 38 SHR-2160/2162/2080/2082 USER’S MANUAL Record Rate & Video Size Event Record Duration NTSC When you press the REC button in the front, it selects the record mode settings. Pre-Event Record/seconds Sets the recording frame rate. The frame rate is number of the recorded scenes per sec- Pre-Event Section ond.

  • Page 39: Event Record Mode

    SHR-2160/2162/2080/2082 USER’S MANUAL Event Record Mode Event record menu’s detailed list is as follows. Alarm Detection Setup Off : Sensor does not operate. N.O(Normal Open) Sensor : Sensor remains open all the time and if closed, an alarm will be issued. (A Contact) N.C(Normal Close) Sensor : Sensor remains closed all the time and if open, an alarm will be issued.
  • Page 40 SHR-2160/2162/2080/2082 USER’S MANUAL Sensitivity Motion Detection Setup Sets the sensitivity of motion detection. Sensitivity grade consists of Low Medium Very High in the ascending order. Alarm-Out Sets the Alarm-Out when Motion occurs. 5 Alarm Outs are supported. Select an alarm-out that you want to synchronize with the current motion channel. Multi-selection is possible.

  • Page 41: Record Schedule

    SHR-2160/2162/2080/2082 USER’S MANUAL Record Schedule Schedule / Event Record On occurrence of Event, Continuous Recording is replaced with Event Recording Mode. Holiday If you press “Holiday”, a calendar pops up and you are able to designate holidays. Move to a date and press “Enter” to complete designation. Press “Enter”...

  • Page 42: Backup

    SHR-2160/2162/2080/2082 USER’S MANUAL Backup Network Backup IP Setup If there is a device, the free space and the backup device is displayed. Select a date, time, and camera No. to backup, and press “Start”. Connection Mode When you change Start Date/Time or End Date/Time, free space keeps updated in the Free Space zone. Designates the kind of the network connected to the main body of A file name is composed of Folder/File Name.
  • Page 43 SHR-2160/2162/2080/2082 USER’S MANUAL Transfer Protocol Settings Sets the IP address for the main body of SHR-2160/2162/2080/2082 to connect with the network. If the Connection Mode is set to Static IP, you shall type in IP yourself. If the connection mode is Dynamic IP or ADSL(PPPoE), the IP allocated by the DHCP server or ADSL company will be automatically displayed.

  • Page 44: Network Setup

    SHR-2160/2162/2080/2082 USER’S MANUAL Network Setup Callback Settings Port Setup for SmartViewer Connection The Callback function is used to forward a callback message to the IP where SmartViewer The Port value for DVR registration of SmartViewer (Setup Site Setup) shall be as is in action in case Alarm, Motion Detection, or Video Loss event occurs.

  • Page 45: Chapter 6 Ptz Camera Control

    Chapter 6 PTZ Camera Control English...

  • Page 46: Ptz Camera Control Mode

    SHR-2160/2162/2080/2082 USER’S MANUAL PTZ Camera Control Mode Select a proper PTZ camera Configuration value in MENU to enter PTZ Control Mode. Other PTZ Camera Control Modes perform its control in a single screen. Press the channel selection button in the left front to select the PTZ setting channel and press the PTZ button. If you succeed in entering Single Screen PTZ Camera Control Mode, the PTZ symbol on the screen will turn yellow from white while the PTZ button will turn blue.

  • Page 47: Basic Operation Of Pan, Tilt, & Zoom

    When using a remote control device (SCC2000), it is possible to control the camera with the Records a certain position of PTZ Camera. remote control limited to the Samsung protocol. (refer to SCC2000 user manual) If there is no PTZ control for 5 minutes from the DVR, PTZ mode is automatically cancelled.

  • Page 48: Camera Menu Setup

    Note name and press the “OK” to save the position and position name. Pan. or Samsung Protocol Camera only is authorized for Camera Menu setup. Press the Preset button in front of SHR-2160/2162/2080/2082 in Single Screen PTZ Camera Control Mode to select Camera Menu.

  • Page 49: Preset View

    Camera Control Mode to supply PTZ Camera. This is a very special function. Press the VIEW button in front of SHR-2160/2162/2080/2082 in Single Screen PTZ Camera Control Mode to select Preset.(For example, Samsung Protocol) Note Note Samsung, Pan., Pel.-P, or Pel.-D Protocol PTZ Camera supports this function. TELE WIDE VIEW PRESET Samsung : Auto Pan / Scan / Pattern Pan.

  • Page 50: Chapter 7 Recording

    Chapter 7 Recording English...

  • Page 51: Rec (Normal Recording)

    SHR-2160/2162/2080/2082 USER’S MANUAL REC (Normal Recording) Schedule Recording Pressing REC the button starts recording as set in the record mode. Then, REC LED While “Record Schedule” or “Schedule/Event recording” is selected in the Record Schedule lights on and a recording icon appears on the screen. During the recording in HDD, menu, Schedule Recording automatically starts.

  • Page 52: Event Recording

    SHR-2160/2162/2080/2082 USER’S MANUAL Event Recording Alarm Detection Sensor operation mode in Alarm of Event Record menu shall be set to N.O (Normal Open) or N.C (Normal Close). Motion Detection Motion detection in the Event Recording menu shall be set to On. Video Loss Detection Video Loss in Event Record menu shall be set to On.

  • Page 53: Before Use

    SHR-2160/2162/2080/2082 USER’S MANUAL Before Use Calendar Search Pressing the “SEARCH” button shows Search Menu on the screen as seen above. Be sure to select both the channel and the date to search. And press the [Start] button to search for the desired time. Calendar Search searches a video file by the use of a calendar at the desired time.

  • Page 54: Event Search

    SHR-2160/2162/2080/2082 USER’S MANUAL Date/Time Search Event Search Searches Normal Recording, Schedule Recording, Alarm Recording, Motion Recording, and Use the Day/Time information to search a video file at the time as you desire. V.Loss(Video Loss) Recording by the time. Up to 16channels can be searched at once. After you select a channel with the œ, ƒ, [Enter] button, the checkbox on the right of You shall select a channel to search to see the event information of the channel.

  • Page 55: Go To First Search

    SHR-2160/2162/2080/2082 USER’S MANUAL Go to Last Search Go to First Search Searches the oldest one among recorded video files. Up to 16 channels can be searched at Searches the latest one among recorded video files. Up to 16 channels can be searched at once.

  • Page 56: Backup

    SHR-2160/2162/2080/2082 USER’S MANUAL Backup Playback In order to play data recorded on the HDD, press the play/pause button ( ‹ ¤ II If you used the SEARCH button for playback just before, the system would remember the ‹ ¤ II information of the played channel until you click the PLAY/PAUSE button( ) again, then the system plays the previous channel.
  • Page 57 SHR-2160/2162/2080/2082 USER’S MANUAL Play screen mode: You can change play screen mode with the mode button and number Play at Faster Speed buttons as the figure below. ¦ ¦ ‹ ‹ If you press the LEFT or RIGHT button( ) during the playback, you will be able to see the screen at the x2, x4, x8, x16, x32, and x64 speed either forwardly or reversely.

  • Page 58: Smart Viewer

    Chapter 9 Smart Viewer English...
  • Page 59 SHR-2160/2162/2080/2082 USER’S MANUAL Introduction Feature Smart Viewer is a program that a general PC user is able to install Thanks to the transmission of video data compressed by the MPEG-4 Video Compression method, it can play the video images of good quality. SHR-2160/2162/2080/2082 to his PC to monitor the video and audio data in the real time through network without going to the site where SHR-2160/2162/2080/2082 is Thanks to the G.711 Voice Compression method, it supplies the voice data of...

  • Page 60: Smart Viewer Installation

    SHR-2160/2162/2080/2082 USER’S MANUAL Smart Viewer Installation PC Specification(Recommendation) OS : Win98SE, WinMe, Win2000, WinXP Smart Viewer Installation Recommendation : CPU Pentium 3, 1GHz or higher Put a Smart Viewer Program CD in CD-ROM and open the “Smart Viewer” folder in the CD. RAM 256 MB or higher VGA RAM 32Mb or higher DirectX 8.1 or higher...
  • Page 61 SHR-2160/2162/2080/2082 USER’S MANUAL Click the “Next” button. The system proceeds with setup file installation and system setup. If you agree with Smart Viewer License, click “Yes”. Installation is complete. Click the “Finish” to terminate the installation. Designate a folder to install Smart Viewer in it and click “Next”. English English...

  • Page 62: Smart Viewer Initial Screen

    SHR-2160/2162/2080/2082 USER’S MANUAL Smart Viewer Initial Screen Smart Viewer Program Execution Double-click the Smart Viewer icon in the background screen to run the program. Screen Description ! This is the button to enter the Search mode in which you can search and play remote the video file recorded in SHR-2160/2162/2080/2082 and enter the Monitoring mode for real-time video monitoring.

  • Page 63: Setup Mode

    SHR-2160/2162/2080/2082 USER’S MANUAL Setup Mode Initial Screen Setup Item Selection Button - It is used for the selection of each setup item. - It is composed of 4 items-DVR Setup, Viewer Setup, Site Setup, and S/W Version. - DVR Setup : Allows you to change the remote menu setup items of SHR-2160/2162/2080/2082.
  • Page 64 SHR-2160/2162/2080/2082 USER’S MANUAL Detailed DVR Setup Items DVR Setup ! System - Information Information shows the information on on-line SHR-2160/2162/2080/2082. - Click the [DVR Setup] button for DVR Setup. - You can change remotely the setup items of SHR-2160/2162/2080/2082 Menu, being connected with Smart Viewer.
  • Page 65 SHR-2160/2162/2080/2082 USER’S MANUAL - Language Caution Caution Language sets the language in which on-line SHR-2160/2162/2080/2082 will be expressed System Password shall be composed of numeric only, up to 8 digits. Note Note - The Delete key and the combination of Ctrl+C or Ctrl+V in the keyboard are not supported at the System Password input.
  • Page 66 SHR-2160/2162/2080/2082 USER’S MANUAL - Remocon (Remote Control Device) @ Camera Remocon can set the remote control device installed to - Config. SHR-2160/2162/2080/2082. Config. sets Video, Audio On/Off, Camera Title, and Auto Sequence Time Sets the remote control to on/off. for each channel of on-line SHR-2160/2162/2080/2082. You can set the remote control’s ID to 0-99.
  • Page 67 SHR-2160/2162/2080/2082 USER’S MANUAL - PTZ device $ Recording It sets Camera ID, Protocol, Baud Rate, Parity, Data Bit, Stop Bit, and Serial - Rec. Qual. Auto Del. In this mode, you can set to normal (general recording) quality, event Mode when connecting the dome camera to all the channels. recording quality, and auto-delete.
  • Page 68 SHR-2160/2162/2080/2082 USER’S MANUAL - Rec. Rate Video Size - Alarm Rec. When recording in normal or event, you can set the rate (recording speed) It sets the information necessary for the alarm recording. and video size (resolution). The set video size here influences the setting of the normal and event recording rate.
  • Page 69 SHR-2160/2162/2080/2082 USER’S MANUAL - Video Loss Note Note Video Loss sets up the information on how to inform the user of Video Loss of SHR-2160/2162/2080/2082. - The Delete key and the combination of Ctrl+C or Ctrl+V in the keyboard are not supported to the network password input.
  • Page 70 SHR-2160/2162/2080/2082 USER’S MANUAL Callback Note Note - You can set the Callback function of SHR-2160/2162/2080/2082. - In the event of Alarm, Motion Detection, or Video Loss, set the IP address and - SHR-2160/2162/2080/2082 uses 4 ports for TCP connection. port of PC where SmartViewer is installed to forward Callback messages. In - The PORT number is flexible and 4 consecutive numbers are grouped for the change ( 554,555,556,557 558,559,560,561 )
  • Page 71 SHR-2160/2162/2080/2082 USER’S MANUAL Video Recording Sequence Time ! Naming - When connecting with SHR-2160/2162/2080/2082 in the monitoring mode, set - Being connected to SHR-2160/2162/2080/2082 in the monitoring or search the auto sequence time if the auto sequence is set. The time can be set from 10 mode, you can save the video displayed with * .dvr file and name it.
  • Page 72 SHR-2160/2162/2080/2082 USER’S MANUAL DVR List Site Setup - Click the [Site Setup] button for Site Setup. - The information of DVR(SHR-2160/2162/2080/2082) or Site that you want to connect by Smart Viewer is set in the Site Setup. - Smart Viewer allows you to connect with DVR(SHR-2160/2162/2080/2082) or Site registered only here.
  • Page 73 SHR-2160/2162/2080/2082 USER’S MANUAL 2.Network Modes - ADSL ! To add a new DVR(SHR-2160/2162/2080/2082) - If DVR(SHR-2160/2162/2080/2082) is connected to the ADSL, set the network mode to ADSL. - If the ADSL connected to DVR(SHR-2160/2162/2080/2082) uses Static IP, - If you press the [New] button, the following window will pop up where you are select Static IP in the Address Type and input the name and IP Address of able to add a new DVR(SHR-2160/2162/2080/2082) information.
  • Page 74 SHR-2160/2162/2080/2082 USER’S MANUAL # To Edit the old DVR(SHR-2160/2162/2080/2082) Note Note - The MAC address of DVR is written at the side label of the product. It is also found in the system information of DVR Menu. - If you select a DVR(SHR-2160/2162/2080/2082) in the DVR list to edit and press - If the DVR(SHR-2160/2162/2080/2082) is connected to ADSL, the network the [Edit] button, the following message box pops up.
  • Page 75 SHR-2160/2162/2080/2082 USER’S MANUAL Site List @ To delete an old site or DVR(SHR-2160/2162/2080/2082) - If you select a site or DVR(SHR-2160/2162/2080/2082) in the site list for deletion and press the [Delete] button, the following message box pops up. Press the [OK] button to delete either site or DVR (SHR-2160/2162/2080/2082).
  • Page 76 SHR-2160/2162/2080/2082 USER’S MANUAL - When the site to edit is connected with the Smart Viewer, the following S/W Version message box pops up and the site cannot be edited. Be sure to cut the connection between the DVR(SHR-2160/2162/2080/2082) and the Smart Viewer before you edit it.
  • Page 77 SHR-2160/2162/2080/2082 USER’S MANUAL Smart Viewer Version @ Click the following button to open the “SHR-2160/2162/2080/2082 Firmware” file in format. 2160/2162/2080/2082 - Smart Viewer Version and system requirements are displayed. DVR Version SHR-2160/2162/2080/2082 2160/2162/2080/2082 - DVR Version not only displays the connected DVR(SHR-2160/2162/2080/2082) # Press the [Upgrade] button to transmit a file to the selected name if any DVR(SHR-2160/2162/2080/2082) is being connected with Smart DVR(SHR-2160/2162/2080/2082) and start the upgrade of...

  • Page 78: Monitoring Mode

    SHR-2160/2162/2080/2082 USER’S MANUAL Monitoring Mode DVR(SHR-2160/2162/2080/2082) / SITE Connection Note Note - Select the name of DVR(SHR-2160/2162/2080/2082) or site for connection and No more than 3 users, one Admin. authorized user and 2 User authorized users are allowed to click the connection button. access SHR-2160/2162/2080/2082 simultaneously.(In the case of multicast, 5 User authorized users are allowable.) Caution...
  • Page 79 SHR-2160/2162/2080/2082 USER’S MANUAL Time Information Note Note # Clicking the speaker icon turns the audio of channel on or off. : Audio OFF : Audio ON If you turn the audio of a SHR-2160/2162/2080/2082 channel off, “Disable” will be - As soon as you are connected to SHR-2160/2162/2080/2082, the current date, day, displayed.
  • Page 80 SHR-2160/2162/2080/2082 USER’S MANUAL Event Log Display Window Caution Caution When Time Change, Load Factory Default, Network Change, System Shutdown, or Hdd Format event occurs, Smart Viewer terminates the connection automatically. Camera connection Indication Window - Click the Log button to activate the log display window. - It displays the event(alarm, user connection, and setup change) occurring at SHR-2160/2162/2080/2082 in the real-time.
  • Page 81 SHR-2160/2162/2080/2082 USER’S MANUAL Screen Split Selection Button - Small Sized Single / Single / Quad / Nine-Split Mode Sixteen-Split Mode - You can change the Split Mode of the screen under monitoring. Sequence Mode Button : When monitoring with Quad Mode - Changes the channel to be played at the preset interval.
  • Page 82 SHR-2160/2162/2080/2082 USER’S MANUAL NEXT button FAVORITE Button - When you click the NEXT button with the left mouse button, you can see the channel that follows the currently-monitored channel. - If you press FAVORITE, the FAVORITE window will be activated. - In Single Mode : 1 1 (CH) - In Quad Mode : 1,2,3,4...
  • Page 83 The PAN / TILT / ZOOM function is supported to all the cameras. But, POWER ZOOM is supported only by Samsung Smart Dome Camera, and assured to the operation of TILT below 45°. Note...
  • Page 84 PRESET setup values. You can set a new PRESET number and Note Note name. The Camera Menu Setup function is supported by Samsung and Panasonic camera Note only. Note ! The PRESET function is supported to all the cameras. You are allowed to set no more than 20 PRESET items.

  • Page 85: Search Mode

    SHR-2160/2162/2080/2082 USER’S MANUAL Search Mode The initial screen of search mode DVR(SHR-2160/2162/2080/2082) Selection/Change by contacting SITE - The search mode is divided into the remote mode to search and play the - Same as “DVR(SHR-2160/2162/2080/2082)/SITE Connection” of the monitoring mode. SHR-2160/2162/2080/2082 video and the local mode to play * .dvr file saved in the directory designated by your PC.
  • Page 86 SHR-2160/2162/2080/2082 USER’S MANUAL Calendar Window @ Backup Button - If not playback(Stop), the video save button performs the backup function. - If the save button is pressed, the window for backup pops up. - If the video data in on-line SHR-2160/2162/2080/2082 was recorded, the date turns red.
  • Page 87 SHR-2160/2162/2080/2082 USER’S MANUAL $ Print Note Note - This function outputs the screen zone of the playback video which is now being displayed. During the play(Play/RevPlay/FF/FB), disconnection or change to the both monitoring mode and local mode is not permitted. Click the Stop button first before the change.
  • Page 88 SHR-2160/2162/2080/2082 USER’S MANUAL Next Button - Changes the channel as the Next button does in the monitoring mode. Note Note You may not change the channel while playing an image (Play/Reverse Play/Fast Forward/Fast Backward). Reload Button Appendix - Updates the record time information in the calendar window and time line. Local Mode - Plays * .dvr file saved in the directory of your PC by the Record function.

  • Page 89: Product Specification

    SHR-2160/2162/2080/2082 USER’S MANUAL Product Specification Specs Details Notes Specs Details Notes 32bit RISC CPU Compression Video : MPEG4 SDRAM : 64MByte Method Audio : ADPCM Memory When using Flash : 16 MByte Resolution Recording Specs Highest Image all 16CH, Operating System Embedded OS (Picture quality) Recording Speed...
  • Page 90 Remark Resolution 120/100i Resolution & 16Ch ps(CIF) 160GB 5400 IDE, P-ATA Spinpoint SV1604E Play Back Recording Specs 30ips(NTSC)/25ips(PAL) 7.5ips(NTSC)/6.3ips(PAL) Samsung 60/50ips 200GB 7200 IDE, P-ATA Spinpoint SP2014N (Half Half D1(N) 15ips(NTSC)/12.5ips(PAL) 3.8ips(NTSC)/3.1ips(PAL) 160GB 7200 IDE, P-ATA WD Caviar SE WD 1600...

  • Page 91: Outline Drawings

    SHR-2160/2162/2080/2082 USER’S MANUAL Outline Drawings [SHR-2160] [SHR-2080] [SHR-2162] [SHR-2082] 10-5 10-6 English English...

  • Page 92: Factory Default

    PostEvent 1 min. Audio Continuous Recording CAM_01 ~ CAM_16 Record Schedule (SHR-2160/2162) Event Recording Camera Config Title CAM_01 ~ CAM_8 Sensor State (SHR-2080/2082) Alarm Camera Camera No. Auto Seq. 5 sec Detection Setup Alarm-Out None Camera No. Duration 10 sec...

  • Page 93: Frame Specification For The Playback

    SHR-2160/2162/2080/2082 USER’S MANUAL SHR-2160/2162/2080/2082 Smart Viewer Frame Specification for the Playback NTSC FRAME Viewer Screen FRAME Viewer Screen VIDEO SIZE VIDEO SIZE RATE Split Mode RATE Split Mode Half D1(N) CIF (C) Half D1(N) CIF (C) 16-split 0.5 frame/sec 16-split 0.42 frame/sec 9-split 2.5 frame/sec...
  • Page 94 SHR-2160/2162/2080/2082 USER’S MANUAL Troubleshooting(FAQ) 1. The system power is dead and LED in front of the system does not operate at all. 8. The cursor cannot reach Start during Calendar Search. - Please check the power connection. - Please check both the channel and the date for play are left checked. Both shall - Check the power voltage.
  • Page 95 SHR-2160/2162/2080/2082 USER’S MANUAL 14. Smart Viewer in operation is disconnected. - If you change time, network setup, HDD format, Default Setup, or HDD attachment or detachment for SHR-2160/2162/2080/2082 DVR, the current Smart Viewer will be automatically disconnected. - Check network connection. Smart Viewer, if disconnected from Network, will try reconnection up to 5 times.
  • Page 96 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.

This manual is also suitable for:

Shr-2160Shr-2162Shr-2082

Table of Contents