Motion Detection Setup - Samsung SHR-6040 User Manual

Motion Detection Setup

Motion Detection Setup
Alarm-Out None
Duration
Sensitivity
High
Area Set
Default
Set the motion detection area, sensitivity and alarm for
each camera video.
Press the enter( ) button after moving the cursor on
the camera to be set.
 Alarm Out
It sets the alarm output when a motion is detected.
Currently the system supports 2 Alarm Out functions
and 1 built-in speaker output.
 Duration
Sets the duration for Alarm Out. The alarm sound is
sustained for the preset period.
COntInue: The alarm output sound will be
maintained until it is cancelled by pressing the ALARm
button manually on the front panel.
10~300 seconds: Sets the duration for alarm output.
 sensitivity
It relates to configuration for motion detection and
sensitivity.
The sensitivity can be set to Very High, High, Medium,
Low or Very Low.
 Area set
If you press the enter( ) button after moving the
cursor to the video display area on the right, the motion
area can be set/cancelled.
( ): Sets the whole part as the motion area.
( ): Cancels the whole motion area.
If you press "Default", the motion setup is reset to the
initial values.
OK Cancel
Video Loss Detection Setup
Video Loss Detection Setup
Alarm-Out Duration
None 10 SEC
None
10 SEC
None
10 SEC
None 10 SEC
Move/Control Select
If a video loss occurs from each channel, it can be set to
generate an alarm output sound.
 Alarm Out
Sets an alarm-out method when an event has
occurred from the Alarm In.
Currently, this system supports 2 Alarm Out functions
and 1 built-in speaker (beep) output.
The following screen appears when you press the
enter( ) button after moving the cursor to the Alarm
Out item.
1 2
Beep All
OK Cancel
 Duration
Sets the duration for Alarm Out. The alarm sound is
sustained for the preset period.
COntInue: The alarm output sound is maintained
until it is cancelled by pressing the ALARm button
manually on the front panel.
10~300 seconds: Sets the duration for alarm output.
OK Cancel
Exit
menu setup _33