Thermal Paper Specifications; Qualified Paper Grades - HP Engage One Retail System 141 Maintenance And Service Manual

5. To test that the paper is loaded correctly, advance the paper with the paper feed button (1), and then
tear the excess paper off against the knife on the cover. A steady green LED (2) means the printer is on
and operating normally. If the LED is flashing, the cover may not be completely shut.

Thermal paper specifications

The printer requires qualified thermal paper with the following dimensions:
● Width: 80 +0/-0.6 mm (3.15 +0/-0.03")
● Diameter: 50.8 mm max. (2")
The paper must not be attached at the roll's core. Use paper with a colored stripe at the end to indicate that
the paper is running low.
The above figures are based on a core diameter of 22 ± 0.5 mm (0.87") outside and 11.5 ± 0.5 mm (0.45")
inside.

Qualified paper grades

Contact the manufacturer of your choice to order paper. HP recommends the following paper grades produced
by their respective manufacturers. There are a number of paper manufacturers qualified to provide this
paper, provided the POS paper rolls are from the recommended grades for monochrome (black ink) paper.
Qualified manufacturers
Appvion, Inc. (USA)
825 E. Wisconsin Ave.
Appleton, WI 54912
http://www.appvion.com
Jujo Thermal Ltd.
P.O. Box 92 FI–27501
Kauttua, Finland
Phone/Fax
Voice: (800) 922–1729
Fax: (800) 922–1712
Voice: 358 (0) 10 303 200
Fax: 358 (0) 10 303 2419
Paper grade
Alpha 400-2.3 (was T1030)
Alpha 800-2.4 (was T1012A)
POS-Plus 600-2.4
Alpha 900-3.4 (was Superior)
All current Appvion papers are
BPA-free
AF50KS–E3
AP62KS–E3
Thermal paper specifications 65