Removing And Attaching The Engage One Head Unit To The Stand - HP Engage One Retail System 141 Maintenance And Service Manual

Removing and attaching the Engage One head unit to the stand

1. Prepare the computer for disassembly
2. Insert a thin metal tool, such as a screwdriver, into the computer head unit release hole (1) on the stand
to depress the release button, and then pull the head unit from the stand (2).
NOTE:
access the release button.
To attach the head unit to the stand, align the guide posts on the rear of the computer head unit with the
corresponding holes in the stand's column, and then press the head unit onto the column.
If a security screw is installed in the release hole, remove the screw with a T-10 screwdriver to
(Preparation for disassembly on page
Removing and attaching the Engage One head unit to the stand
19).
27