Removing The Speakers - HP Engage One Retail System 141 Maintenance And Service Manual

Removing the speakers

The computer uses two separate speakers located on the left and right sides. Each speaker has a cable that
connects to a separate connector.
To remove the speakers:
1. Prepare the computer for disassembly
2. Remove the computer head unit from the stand
the stand on page
3. Remove the display panel from the computer head unit
4. For each speaker, disconnect the cable from the system board (1), and then use a flat tool to pry each
speaker out of the computer head unit (2). The speakers are held in place with adhesive.
To replace the speakers, reverse the removal procedures.
(Preparation for disassembly on page
27).
(Removing and attaching the Engage One head unit to
(Removing the display panel on page
19).
41)
Removing the speakers 53