Removing The Heat Sink - HP Engage One Retail System 141 Maintenance And Service Manual

Removing the heat sink

The heat sink is secured to the system board, under the heat sink shield.
To remove the heat sink:
1. Prepare the computer for disassembly
2. Remove the computer head unit from the stand
the stand on page
3. Remove the display panel from the computer head unit
4. In the order indicated on the heat sink, loosen the five captive Phillips screws that secure the heat sink
to the system board (1) - (5).
5. Lift the heat sink off the system board (6).
CAUTION:
on the surface of the processor or the heat sink.
To replace the heat sink, reverse the removal procedures.
27).
To reduce a degradation in thermal performance, be sure not to touch the thermal grease
(Preparation for disassembly on page
(Removing and attaching the Engage One head unit to
(Removing the display panel on page
19).
41)
Removing the heat sink 51