Installing A 2 X 20 Customer-Facing Display (Cfd) - HP Engage One Retail System 141 Maintenance And Service Manual

Installing a 2 x 20 customer-facing display (CFD)

1. Prepare the computer for disassembly
2. Remove the computer head unit from the stand
the stand on page
3. Remove the display panel from the computer head unit
4. Remove the rubber stoppers from the CFD cable routing channel and the two CFD screw holes.
5. Route the CFD cable through the routing channel on the computer head unit (1). Pull the cable all the
way through the channel (2), and then slide the screw tabs on the CFD into the slots on the computer
head unit (3).
(Preparation for disassembly on page
27).
(Removing and attaching the Engage One head unit to
(Removing the display panel on page
Installing a 2 x 20 customer-facing display (CFD)
19).
41)
43