Removing the antennas
The wireless antenna cables connect from the WLAN module to antennas at the top of the computer.
To remove the antennas:
1.
Prepare the computer for disassembly
2.
Remove the computer head unit from the stand
the stand on page
3.
Remove the display panel from the computer head unit
4.
Position the display panel upside down.
5.
Peel the foam off the top of the display panel.
6.
Peel the antennas off the top of the display panel (1), and the remove the cables from the routing paths
along the top of the display (2).
To reinstall the antennas, reverse the removal procedure.
62
Chapter 4 Removal and replacement procedures
(Preparation for disassembly on page
27).
(Removing and attaching the Engage One head unit to
(Removing the display panel on page
19).
41)