Configuring Global Evpn Timers - Cisco ASR 9000 Series Configuration Manuallines

Implementing IEEE 802.1ah Provider Backbone Bridge
• The import keyword imports routing information from the target VPN extended community.
• The export keyword exports routing information to the target VPN extended community.
Step 10 rd { 2-byte as_number | 4-byte as_number | IP_address | none } : { nn }
Example:
RP/0/RSP0/CPU0:router(config-evpn-evi-bgp)# rd 25:30
Configures the route distinguisher.
Step 11
Use the commit or end command.
commit - Saves the configuration changes and remains within the configuration session.
end - Prompts user to take one of these actions:
• Yes - Saves configuration changes and exits the configuration session.
• No - Exits the configuration session without committing the configuration changes.
• Cancel - Remains in the configuration mode, without committing the configuration changes.

Configuring Global EVPN Timers

Perform this task to configure global EVPN timers.
SUMMARY STEPS
1. configure
2. evpn
3. timers [flushagain | peering | programming | recovery]
4. Use the commit or end command.
DETAILED STEPS
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Enters the Global Configuration mode.
Step 2
evpn
Example:
RP/0/RSP0/CPU0:router evpn
Enters EVPN configuration mode.
Step 3
timers [flushagain | peering | programming | recovery]
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
Configuring Global EVPN Timers
393