Implementing Ieee 802.1Ah Provider Backbone Bridge - Cisco ASR 9000 Series Configuration Manuallines

Implementing IEEE 802.1ah Provider Backbone
Bridge
This module provides conceptual and configuration information for IEEE 802.1ah Provider Backbone Bridge
on Cisco ASR 9000 Series Routers. The IEEE 802.1ah standard (Ref [4]) provides a means for interconnecting
multiple provider bridged networks to build a large scale end-to-end Layer 2 provider bridged network.
The Cisco ASR 9000 Series Aggregation Services Routers now supports a scenario when the provider backbone
bridge is a VPLS network. You can now configure pseudowires in the PBB edge bridge domain and core
bridge domain. In either type of bridge domain, the pseudowire functionality remains the same as in the native
bridge domain.
Feature History for Implementing IEEE 802.1ah Provider Backbone Bridge
Release
Release 3.9.1
Release 4.3.0
Release 4.3.2
Release 5.1.2
Release 6.3.2
Supported Hardware
Feature Name
Basic PBB
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
C H A P T E R
Modification
This feature was introduced on Cisco ASR 9000 Series
Routers
Support was added for these features:
• Provider Backbone Bridge VPLS
• Multiple I-SID Registration Protocol Lite (MIRP
Lite)
Support was added for PBB-EVPN feature.
Support was added for MMRP for PBB VPLS Flood
Optimization feature.
Support for PBB-EVPN on nV Satellite access
interface bundle over ICL (Inter Chassis Link) bundle.
ASR 9000 Ethernet Line Card
Yes
7
ASR 9000 Enhanced Ethernet Line
Card
Yes
355