Configuring Local And Remote Cookies - Cisco ASR 9000 Series Configuration Manuallines

Configuring Local And Remote Cookies

When configured, remote session value(expected at the decapsulation side) is used for encapsulation- side
Note
processing, and the value in the session value field of the L2TPv3 header is programmed.
Step 9
Use the commit or end command.
commit - Saves the configuration changes and remains within the configuration session.
end - Prompts user to take one of these actions:
• Yes - Saves configuration changes and exits the configuration session.
• No - Exits the configuration session without committing the configuration changes.
• Cancel - Remains in the configuration mode, without committing the configuration changes.
Configuring Local And Remote Cookies
Perform this task to configure local and remote cookies.
SUMMARY STEPS
1. configure
2. l2vpn
3. xconnect group group-name
4. p2p xconnect-name
5. interface type interface-path-id
6. neighbor ipv6 peer-address pw-id pseudowire-id
7. l2tp static local cookie size bytes
8. l2tp static local cookie size bytes
9. Use the commit or end command.
DETAILED STEPS
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Enters the Global Configuration mode.
Step 2 l2vpn
Example:
RP/0/RSP0/CPU0:router (config)# l2vpn
Enters Layer 2 VPN configuration mode.
Step 3
xconnect group group-name
Example:
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
158
Implementing Point to Point Layer 2 Services