Configuring Vpls With Bgp Autodiscovery And Signaling - Cisco ASR 9000 Series Configuration Manuallines

Implementing Multipoint Layer 2 Services
Saves configuration changes
Step 8
end
Example:
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-ac)# end
Returns to EXEC mode.
Step 9
show l2vpn bridge-domain detail
Example:
RP/0/RSP0/CPU0:router # show l2vpn bridge-domain detail
Displays information about bridges, including whether each AC is in the AC split horizon group or not.

Configuring VPLS with BGP Autodiscovery and Signaling

Perform this task to configure BGP-based autodiscovery and signaling.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12. signaling-protocol bgp
13. ve-id { number}
14. ve-range { number }
15. Use the commit or end command.
DETAILED STEPS
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Enters the Global Configuration mode.
configure
l2vpn
bridge group bridge group name
bridge-domain bridge-domain name
vfi { vfi-name }
vpn-id vpn-id
autodiscovery bgp
rd { as-number:nn | ip-address:nn | auto }
route-target { as-number:nn | ip-address:nn | export | import }
route-target import { as-number:nn | ip-address:nn }
route-target export { as-number:nn | ip-address:nn }
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
Configuring VPLS with BGP Autodiscovery and Signaling
267