Implementing Ipv6 Vpn Provider Edge Transport Over Mpls; Overview Of 6Pe/Vpe - Cisco NCS 540 Series Configuration Manual

Implementing IPv6 VPN Provider Edge Transport
over MPLS
IPv6 Provider Edge or IPv6 VPN Provider Edge (6PE/VPE) uses the existing MPLS IPv4 core infrastructure
for IPv6 transport. 6PE/VPE enables IPv6 sites to communicate with each other over an MPLS IPv4 core
network using MPLS label switched paths (LSPs).
This feature relies heavily on multiprotocol Border Gateway Protocol (BGP) extensions in the IPv4 network
configuration on the provider edge (PE) router to exchange IPv6 reachability information (in addition to an
MPLS label) for each IPv6 address prefix. Edge routers are configured as dual-stack, running both IPv4 and
IPv6, and use the IPv4 mapped IPv6 address for IPv6 prefix reachability exchange.
Familiarity with MPLS and BGP4 configuration and troubleshooting is required for implementing 6PE/VPE.
•
•
•
•
•
•
•

Overview of 6PE/VPE

Multiple techniques are available to integrate IPv6 services over service provider core backbones:
• Dedicated IPv6 network running over various data link layers
• Dual-stack IPv4-IPv6 backbone
• Existing MPLS backbone leverage
These solutions are deployed on service providers' backbones when the amount of IPv6 traffic and the revenue
generated are in line with the necessary investments and the agreed-upon risks. Conditions are favorable for
the introduction of native IPv6 services, from the edge, in a scalable way, without any IPv6 addressing
restrictions and without putting a well-controlled IPv4 backbone in jeopardy. Backbone stability is essential
for service providers that have recently stabilized their IPv4 infrastructure.
Overview of 6PE/VPE, on page 55
Benefits of 6PE/VPE, on page 56
Deploying IPv6 over MPLS Backbones, on page 56
IPv6 on the Provider Edge and Customer Edge Routers, on page 56
OSPFv3 6VPE, on page 57
Configuring 6PE/VPE, on page 58
Configuring OSPFv3 as the Routing Protocol Between the PE and CE Routers, on page 60
L3VPN Configuration Guide for Cisco NCS 540 Series Routers, IOS XR Release 6.3.x
2
C H A P T E R
55