Johnson Controls TEC3310 Installation Instructions Manual page 40

Table 10: Menus and Submenus (Part 7 of 9)
Level 1 Level 2
(LCD Screen Name)
Equipment Setup Min Command*
(Cont)
Med Fan Speed On Cmd*
High Fan Speed On Cmd*
Reheat
Reheat Installed
Reheat Min Damper Position*
Reheat Fan Required*
Reheat Min On Time*
Reheat Min Off Time*
Changeover
Changeover Mode*
Supply Temp Type*
Changeover Setpoint*
Supply Temp Sensor*
Supply Temp Offset*
Trend EFF-ZNT
EFF-SETPOINT
EFF-ZNH
B1 Status
B2 Status
EFF-OAT
EFF-SAT
FANSPD-S
CLG1-C
CLG2-C
HTG1-C
HTG2-C
OAD-O
HTG-O
CLG-O
TEC3000 Series On/Off or Floating Fan Coil and Individual Zone Thermostat Controllers with Dehumidification
Level 3
(Default Values)
20%
33%
66%
No
20%
No
180 seconds
180 seconds
Auto
Analog Sensor
55°F
Nickel
0°F
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Capability Installation Instructions
40
1
Available Values
0 to 100%
* Fan coil units only, variable-speed fan
0 to 100%
* Fan coil units only, multi-speed fan
0 to 100%
* Fan coil units only, multi-speed fan
Yes (True) or No (False)
0 to 100%
* VAV units with reheat installed
Yes or No
*Fan coil units with reheat installed
0 to 360 second
* Reheat installed
0 to 360 seconds
* Reheat installed
Auto, Cooling, or Heating
* Non 4-Pipe units
Analog Sensor, Heating NC, Cooling NC
* Changeover Mode = Auto
40 to 200°F (4 to 93°C)
* Supply temp type = analog sensor
Nickel, Platinum, A99B, 2.25k ohm NTC,
10k ohm NTC, 10k ohm NTC Type 3
* Supply temp type = analog sensor
-5 to 5°F (-3 to 3°C)
* Supply temp type = analog sensor
-50 to 250°F (-45.56 to 121.11°C)
45 to 100°F (7.22 to 37.78°C)
0 to 100%RH
On or Off
On or Off
-50 to 250°F (-45.56 to 121.11°C)
-50 to 250°F (-45.56 to 121.11°C)
On or Off
On or Off
On or Off
On or Off
On or Off
0 to 100%
0 to 100%
0 to 100%