Chapter 5 Mounting The Router; Overview Of The Pole Mount Kits - Cisco 1240 Hardware Installation Manual

D E C . 2 0 1 1 — E F T R E V I E W D R A F T — C I S C O C O N F I D E N T I A L
Mounting the Router
This chapter describes the safety information, equipment, and procedures required to mount the Cisco
1240 Connected Grid Router on a vertical pole or streetlight. This chapter contains these sections
•
•
•
•
•
•

Overview of the Pole Mount Kits

You will need some or all of the kits described in this section to install the router on a pole. Your
installation environment and requirements determine the kits you need.
The
:
Cisco Part Number
CGR-PMK1000
CGR-PMK-BAND
CGR-PMK-BAND
AIR-BAND-INST-TL=
OL-12345-01
Overview of the Pole Mount Kits, page 4-1
General Safety Information for Mounting, page 4-2
Contents of the Mounting Kits, page 4-2
Materials and Tools You Supply, page 4-6
Mounting Instructions, page 4-6
Grounding Instructions, page 4-18
Contents of the Mounting Kits
Name
Pole Mount Kit
Mounting
Bracket Kit
Band Strap Kit
Strap Tool Kit
C H A P T E R
section includes a detailed description of each kit.
Description
This kit is required for all pole or streetlight installations
and includes a mounting plate and the hardware required
to attach the mounting plate to a pole.
Use this kit if your installation requires a Cisco mounting
bracket to mount the router. This kit is used with the pole
kit and includes the hardware required to attach the
mounting bracket to the mounting plate.
This kit includes two steel straps for mounting the router
on poles larger than 5 inches (14 cm) in diameter. This kit
is used together with the
is required to install the steel straps on a pole.
This kit includes a Band-It tool that is required when using
steel straps to install the router on poles larger than
Cisco 1240 Connected Grid Router Hardware Installation Guide
4
Pole Mount Kit. A Band-It Tool
4-1