Closing The Door - Cisco 1240 Hardware Installation Manual

Opening the Router Door
D E C . 2 0 1 1 — E F T R E V I E W D R A F T — C I S C O C O N F I D E N T I A L

Closing the Door

Verify that the door seal is clean and that all cables are tucked back into the chassis.
Step 1
To close the door, use the wrench to evenly tighten all six screws in the order shown in
Step 2
Evenly tighten the screws again, in the order shown in
Step 3
torque.
Replace any locking mechanism on the door.
Step 4
Figure 4-3
Cisco 1240 Connected Grid Router Hardware Installation Guide
4-4
Captive Screw Detail
Chapter 4 Opening the Router Chassis
Figure 4-1, this time using 6 to 7 foot-pounds of
Figure 4-1.
OL-26223-01