Cisco 1240 Hardware Installation Manual page 19

Chapter 2 Router Hardware Description
D E C . 2 0 1 1 — E F T R E V I E W D R A F T — C I S C O C O N F I D E N T I A L
Figure 2-5
1
2
Table 2-4 Router Left Side Exterior Features
Description
1
Mounting bracket connectors (4)
2
SD flash memory module port
OL-12345-01
Router Left Side Exterior
Detailed Information
Mount supported brackets to the router using these connectors. For information
about router mounting options and procedures, see the chapter
Remove the plug shown here for access to the router SD module, which is described
in the SD Flash Memory Module, page
information about using an SD flash memory module with the router, see the chapter
Using the SD Flash Memory
When a mounting bracket is installed on the router, the bracket blocks
Note
access to the SD card port. In order to access the port after the bracket is
installed, you must remove the router from the pole, and rotate the bracket
away from the port. For detailed instructions,
Cisco 1240 Connected Grid Router Hardware Installation Guide
2-16, later in this chapter. For detailed
Module.
Router Overview
Mounting the Router.
2-7