Install The Router On The Mounting Bracket - Cisco 1240 Hardware Installation Manual

Chapter 4 Mounting the Router
D E C . 2 0 1 1 — E F T R E V I E W D R A F T — C I S C O C O N F I D E N T I A L
Figure 4-12

Install the Router on the Mounting Bracket

This section describes how to attach the router to the mounting bracket. The instructions for the
procedures in this section refer to the mounting bracket kit contents shown in
features described in
What You Need
•
•
To mount the router on the bracket, take these steps and refer to
Assemble eight sets of bracket hardware (washer, split lock washer, and bolt) as shown in the section
Step 1
Assemble Bracket Hardware, page
One each side of the router, attach one set of hinge bolt hardware to the mounting bracket connector (
Step 2
Do not tighten the hardware until
to slide the router onto the bracket.
OL-12345-01
Mounting Bracket Attached to Mounting Plate
Figure 4-11.
Mounting bracket and hardware included in the
Socket wrench that you supply.
Mounting Bracket
4-12.
Step 5. There must be enough space between the washer and the router
Cisco 1240 Connected Grid Router Hardware Installation Guide
Mounting Instructions
Figure 4-2 and the bracket
Kit.
Figure 4-13 and Figure 4-14:
).
1
4-15