Install The Mounting Plate-Poles Larger Than 5 Inches In Diameter - Cisco 1240 Hardware Installation Manual

Chapter 4 Mounting the Router
D E C . 2 0 1 1 — E F T R E V I E W D R A F T — C I S C O C O N F I D E N T I A L
Use a socket wrench to evenly tighten all four carriage bolts to finish installing the mounting plate on
Step 9
the pole.
Figure 4-7
Item
1
2
3
Install the Mounting Plate—Poles Larger than 5 Inches in Diameter
To install the mounting plate on a vertical pole that is larger than 5 inches (12.7 cm) in diameter, follow
these steps and refer to
OL-12345-01
Mounting Plate Installed on Pole with Clamp Brackets
Description
Pole clamp notch
Carriage bolts (4)
Pole clamps (2)
Figure 4-8.
Cisco 1240 Connected Grid Router Hardware Installation Guide
Mounting Instructions
4-9