Quick Start - Royal CMS487 PLUS Operating Instructions Manual

QUICK START
CMS482 PLUSjCMS487 PLUS
The Quick Start Program Is designed to help you quickly "get started" with the basics you need to run your cash
register. It covers programming the Decimal Point. Rounding, Date, Time, Tax Rate, and Departments lor taxing
Or
non-taxing. Follow the Quick Start straight through, however, skip any steps which are not required by Your
business needs. In going through the Quick Start, If an error tone sounds, press the Clear (C) Key and continue
by repeating the step you are attempting to program.
NOTE: It is not necessary to repeat the entire Quick Start Program if you wish to update or change a step
at any time. Therefore, maintain your owner's manual in a safe place lor all future programming.
1. Read "Getting to Know Your Cash Register" and "Inslall Paper Roll" '(see pages 1-7).
2. Turn the Manager Key in the Control Lock to the "PRG" (Program) position.
3. Press (AMT TENDfTOTAL) to generate a check tape.
4. To set the DECIMAL POINT (2 places, normally used in the U.S.) and the "THANK YOU CALL AGAIN" stamp:
Type (1), press (PO), type (6), press (AMT TEND/TOTAL), then press (#/ST/NS).
Important: In the "REG" (Register) mode, it Is not necessary to press the decimal point when
ringing up a price.
5. To set the format for printing the DATE and TIME:
Type (2), press (PO), type (1). press (AMT TEND/TOTAL), then press (# /ST INS).
6. To set the DATE (use Year-Month-Day lormat). Note: The date will print Month-Day-Year In the "REG'
(Register) mode. Example, to set May 27, 1991:
Type (1), press (OTY ITIME), type (9)(1)(0)(5)(2)(7), then press (AMT TEND/TOTALl.
7. To set the CURRENT TIME (use military time). Example, to set 9:00 a.m.:
Type (2), press (OTY ITIME). type (0)(9)(0)(0), then press (AMT TENDlTOTAL).
Reminder: )0 convert to military lime. add the number 12 to every hour after 12:00 noon; Le ..
to set 3:15 p.m., type (1515).
8a. To set a DEPARTMENT for CHARGING TAX. Example, program (DEPARTMENT 1) for charging tax:
Press (PLU/ALT), type (0)(0)(0)(1), then press (DEPARTMENT 1).
* Repeat (PLU/ALT) (0)(0)(0)(1) before every department you want to charge tax.
8b. To set a DEPARTMENT for CHARGING NO TAX. Example. program (DEPARTMENT 2) for charging no tax:
Press (PLU/ AL T), type (0)(0)(0)(0), then press (DEPARTMENT 2).
*.
Repeat (PLU/ALT) (0)(0)(0)(0) before every department you want to charge no tax.
9a. To set the TAX RATE. Example, If your tax rate is 5%:
Type (1)(1), press (OTY /TIME), type (5), then press (AMT TEND/TOTAL).
Note: If. for example, your tax rate is 7.5% then type (7.5).
9b. To set the ROUNDING to the 5th place (normally used in the U.S.):
Type (9), press (PO), type (5), press (AMT TEND/TOTAL), then press (#
1ST
/NS).
8
~
..
--~~
..
~---