Fainted Outline, Darker At Edge - Konica Minolta AccurioPress C2070 Troubleshooting Manual

1.3.13. Fainted outline, darker at edge

(1) Symptom
On halftone image, the outline of the paper leading edge side gets fainted (fainted outline) and
the trailing edge side outline gets darker.
(2) Cause
The symptom which occurs due to the reverse rotation direction between developing roller and
drum rotation direction is in counter.
(3) Solution
Adjust the outline process.
[User Setting] → [Printer Setting] → [Outline Process]
1. FD Lead Edge Density Adjustment
When the value is changed from 0 (default) to larger, the outline at lead edge is written
darker. It is effective to prevent fainting at the leading edge. The more the larger value
is selected, the darker the line becomes.
2. FD Rear Edge Density Adjustment
When the value is changed from 0 (default) to lower value, the outline at the trailing edge is
written lighter. Darker edge of the text is improved.
Note
Check the image at the adjustment to check the effect.
It is effective for the print image. Copy image is out of adjustment target.
It is effective not only for the text but also for the graphic. However, when the problem area
is l like trailing edge of the patch, this adjustment is not effective enough.
Table of contents
KONICA MINOLTA Confidential
Adjust to + direction.
Adjust to – direction.
- 77 -