Konica Minolta AccurioPress C2070 Troubleshooting Manual page 85

5 Embossed paper
setting
6 Toner refresh mode
a. Adjust based on [4. Embossed paper profiles].
1. <Service man setting> At first, adjust the machine to be the best condition for embossed
paper.
Download the paper profile for emboss paper from CSES, and import to the machine.
Download DLBT1606179* from CSES, save the [export] folder to USB memory.
Insert USB to the machine and import the paper profile.
[Utility]→[User Setting]→[System Setting]→[Paper Tray Setting]→[Paper Setting]
→[Import]→[Individual]→[Select all]→[New Store]→[OK]→[Import]
4 patterns process settings are as follows.
2. Execute toner band creation function (YMCK5%).
When printing low coverage (less than YMCK5%) job continuously, transfer ability for
embossed paper becomes poorer as the toner inside the developing unit gets deteriorated.
When theYMCK5% or more coverage job is printed, the transfer ability become stable.
By using toner band creation function, the toner is regularly ejected from the developing unit,
and fresh toner is supplied.
When the less than YMCK5% coverage is printed continuously, printing temporary stops
and toner band is created on the intermediate transfer belt to keep minimum coverage
becomes YMCK5%.
DipSW
Toner band
creation
setting
Color(YMCK)
Side effect

Toner band creation setting reduces the productivity (Reduce by max 10% for A4
conversion) when the coverage is YMCK5% and increases toner consumption at low
coverage printing.

When the intermediate transfer CL blade count reaches more than half,
the cleaning failure may occur.
Note

When the low coverage job was printed just before enabling the toner band creation,
the effect does not appear immediately because all the deteriorated toner is not
ejected at once. Therefore, print 1000 prints of 20% coverage original for all colors
(Y/M/C/K).

It may increase toner consumption.
3. <Customer workflow> Conduct before printing embossed paper.
Execute toner refresh mode 2 times.
Replace toner in the developing unit by performing the toner refresh mode.
[Utility/Counter]→[Administrator Setting]→System Setting]→[Expert Adjustment]→[Execute
Adjust Operation ]→[Toner Refresh Mode]→[Cancel]→[Exit[UTULITY]]
4. Set the profile to the tray used in [Paper Setting]
Set contents of each paper profile
KONICA MINOLTA Confidential
High Decrease productivity
High effect
Low Increase toner
(Just consumption
temporary)
0%
DipSW 04-0= 0 DipSW104-0=0
DipSW104-1=0 DipSW104-1=1
(Default)
- 84 -
1.5% 3%
DipSW104-0=1
DipSW104-1=0
Recommend
Based on [4] or [5]
Temporary solution
5%
DipSW104-0=1
DipSW104-1=1