Pickup Jam Clearance Workflow - Konica Minolta AccurioPress C2070 Troubleshooting Manual

2.1.18. Pickup jam clearance workflow

Introduction
Paper status in the tray largely affects paper feed ability such as JAM and skew.
experience, incorrect paper setting in the tray is one of the major factors causing JAM.
Please thoroughly instruct user to set the paper in the tray with the correct procedure. This will
reduce jam occurrence.
1. How to set paper correctly to the tray
1.1 How to set paper (basic procedure)
i） Set a few sheets of paper to the tray and adjust the side guides with both hands.
Note:
Adjusting in one-handed, only one side guide moves and another side do not move well.
This may result in off-center in the tray.
ii） Slide the knob at the side of the tray then close the tray.
iii） Open the tray after the lift up plate reaches to the topmost position.
KONICA MINOLTA Confidential
- 149 -
When moving side guide,
use the both hands as
shown in the photo.
Sliding the knob (see photo left) at the side
of the tray can make adjustment without
downing the lift up plate. (After sliding the
knob, it is necessary to open and close the
tray). This enables to make more precise
adjustment of the gap between paper and
side guides. After adjustment, return the
knob to the original position.
From the