Settings For Integrated Security Software - Kenwood TS-890S Setting Manual

Click "Allow Access" to allow access to control command data communication and voice data
communication of ARCP-890.
Tips:
Normally, if you do the above operation, it will not be warned during the use of ARCP-890
after that. If the warning is displayed again while using ARCP-890, add the setting to allow
ARCP - 890 communication in the Windows Firewall setting in the control panel.

3.4.2. Settings for integrated security software

When using integrated security software, it is necessary to set it so as not to disturb ARCP -
890 communication. Please refer to the instruction manual of your integrated security
software and set it.
Fig. 3.10: Windows Firewall Settings
20