Arcp-890 Setting And Operation For Remote Control By Internet Connection; Pc Operating Environment; Installing Arcp-890 - Kenwood TS-890S Setting Manual

station's ARCP-890, confirm the global IP address in advance. The global IP address is
managed by the internet service provider. Ask your internet service provider or check the
global IP address that your broadband router is acquiring. (Please refer to the instruction
manual of Broadband Router etc.)

4.3. ARCP-890 setting and operation for remote control by Internet connection

4.3.1. PC operating environment

When operating remotely via Internet connection, the operating environment required for
the PC running ARCP-890 is as follows.
Operating System (OS)*
Processor
System Memory (RAM)
Free Hard Disk Space
Software
Peripheral Devices
* Applicable operating systems are subject to change without notice due to the end of the
technical support by Microsoft Corporation or change of the product specifications.

4.3.2. Installing ARCP-890

Download and install the ARCP-890 to the PC from the KENWOOD website:
http://www.kenwood.com/i/products/info/amateur/software_download.html
For the installation method, refer to the guide on the download page.
Table 4.9 PC operating environment
Windows 10 (version 1703 (OS Build 15063.0) or later, 32-bit or
64-bit version)
Windows 8.1 (RTM or later, 32-bit or 64-bit version)
Windows 7 (Service Pack 1 or later, 32-bit or 64-bit version)
Faster than the recommended CPU for OS on which you are
operating
RAM having the System Memory recommended by the respective
OS used in your PC or larger
100 MB or more of free hard disk space
Microsoft .NET Framework 4.7 (including .NET Framework 4.0)
Displays with resolutions higher than SXGA (1280 x 1024)
Keyboard, mouse or other pointing devices
USB 2.0 port or RS-232C interface
Network function
Available networking environment (LAN or high-speed broadband)
Sound function and audio input/output device (microphone and
speaker, or headset)
26