Ts-890S Settings In Conventional System; Administrator Settings; Settings The Built-In Voip(To Turn Off) - Kenwood TS-890S Setting Manual

Connect TS-890S and the host PC with analog audio cable. To connect the PC's audio output
line to pin 11 (ANI) of the ACC 2 connector and PC audio input line to pin 3 (ANO) of the
ACC 2 connector, make the connection cable referring to the figure below.

5.2. TS-890S settings in conventional system

5.2.1. Administrator settings

Set the following items in KNS menu. For the operation method, refer to the operation
manual of the TS-890S.

5.2.2. Settings the built-in VoIP(to turn OFF)

In the KNS menu, set the built-in VoIP function to "Off". For the operation method, refer to
the operation manual of the TS-890S.
Fig. 5.2: Wiring method of the audio cable
Table 5.1 Administrator settings
KNS Menu Item
1 Administrator ID
2 Administrator Password
Table 5.2 Setting the built-in VoIP
KNS Menu Item
3 Built-in VoIP
38