Settings Of Arvp-10 In Conventional System; Installing Arvp-10 - Kenwood TS-890S Setting Manual
Network command system
Hide thumbs
Also See for TS-890S:
- Instruction manual (196 pages) ,
- In-depth manual (96 pages) ,
- Command reference manual (77 pages)
Table of Contents
Advertisement
Fig. 5.17: Set point of "Delay by TX to RX Transition"
Select the delay time of "During KNS (KENWOOD NETWORK COMMAND SYSTEM) (Via
ARHP-890) Connection" from the drop-down list. After setting, click the "Close" button to
close the "Select Modulation Line" window.
5.5. Settings of ARVP-10 in conventional system
5.5.1. Installing ARVP-10
Download and install the ARVP-10 to the Host PC and the Remote PC from the KENWOOD
website:
http://www.kenwood.com/i/products/info/amateur/software_download.html
For the installation method, refer to the guide on the download page. ARVP-10H and
ARVP-10R are installed on each PC.
56
- Quick Links:
- Administrator Settings
Hide quick links:
Advertisement
Table of Contents
