reception when performing the transmission end operation with ARCP-890.
When you are connected to the TS-890S and selecting "Select Modulation Line" from the
"TX/RX" menu of ARCP-890, the "Select Modulation Line" window will be displayed.
Select the delay time of "During KNS (KENWOOD NETWORK COMMAND SYSTEM) (Directly to
TS-890S) Connection" from the drop-down list. After setting, click the "Close" button to close
the "Select Modulation Line" window.
3.4. PC settings for remote operation by LAN connection
3.4.1. Windows Firewall settings
Depending on the OS used on the PC, the OS may open the "Windows Security Alert"
window at the timing of accessing the VoIP function for the first time after the first running
of ARCP-890.
Fig. 3.9: Set point of "Delay by TX to RX Transition"
19