Windows Firewall Settings; Comprehensive Security Software Settings; Making The Host Station Connection Request Wait Mode; Connecting To The Host Station From The Remote Station - Kenwood TS-990S Setting Manual

4.7. Windows Firewall Settings

With the host station PC, receiving connections from networks and the Internet
using the ARHP-990 and ARVP-10 are blocked by the Windows firewall. When
blocked, KNS operations are disabled, so remove the block.
Reference:
Add the ARHP-990 and ARVP-10H to "exceptions" using the Windows firewall
settings, to release the block.

4.8. Comprehensive Security Software Settings

If using comprehensive security software, it is necessary to adjust the settings
so that ARHP-990, ARCP-990 and ARVP-10 communications are not blocked.
Perform the settings with reference to the user's manual for the comprehensive
security software used.

4.9. Making the Host Station Connection Request Wait Mode

Click the "Connect" button in the main window of the ARHP-990 on the host
station. The indicator will light yellow and the host station will enter connection
request wait mode.
If you are using the ARVP-10 as a VoIP Program, click the "Online" button in the
main window of the ARVP-10H on the host station. The notation of the "Online"
button changes to "Offline" and the host station will enter connection request
wait mode.

4.10. Connecting to the Host Station from the Remote Station

Click the "Connect" button in the main window of the ARCP-990 on the remote
station. If the connection to the host station is successful, the indicator will light
green. After the pop-up message of display updating has disappeared, you can
start operation.
If you are using the ARVP-10 as a VoIP Program, click the "Connect" button in
the main window of the ARVP-10R on the remote station. If the connection to
the host station is successful, the indicators will light green and red.
20