Emergency Positions; Emergency Release Of A Mattress Support Section; Transportation And Storage - Invacare NordBed Kid User Manual

Hide thumbs Also See for NordBed Kid:
Table of Contents

Advertisement

1. Lift the leg section up to desired height.
2. Lower it until it stays in a fixed position.
Down – from upper position
1. Lift the leg section up to its highest position and unhook
it with a little jerk.
2. Sink the leg section all the way down.

4.7 Emergency positions

In case of a medical emergency, it might be required to
bring all or certain mattress support sections into a flattened
position - e.g. a flattened back section for cardiopulmonary
resuscitation (CPR).
To bring a mattress support section into a flattened position,
use the corresponding function on the hand control
OR
in case of power failure or urgent need for action, use
the manual emergency release and lower the mattress
support section.
4.7.1 Emergency release of a mattress support
section
In case of a power- or motor failure, an emergency release
of the back, thigh or leg section could be necessary . An
emergency release of the height adjustment is NOT possible.
60126224-A
CAUTION!
Risk of injury
– A minimum of two persons is required for
an emergency release of a mattress support
section.
– When releasing a mattress support section,
it might lower fast. Do not reach under the
mattress support while lowering it.
IMPORTANT!
– Before an emergency release of the mattress
support, remove the plug from the mains
socket.
1. Both persons hold the mattress section.
2. One of them locates the motor in question and pulls
out the safety pin.
3. Both persons slowly lower the mattress section until it
is completely down.

4.8 Transportation and Storage

The bed can be transported or stored in assembled or
disassembled state.
See the service manual for detailed instructions on how to
disassemble the bed.
To transport or store the bed in its assembled state:
1. Disconnect the power cable from the mains socket.
2. Use the hook near the mains plug to attach the power
cable to the bed (e.g. on bed ends or frame) so it is
kept clear of the floor and damage during transport or
storage is prevented.
Usage
15

Advertisement

Table of Contents
loading

Table of Contents