C300 Controller Operation - Honeywell C300 User Manual

7. C300 Controller Operation

This chapter describes the information about operating and monitoring the controller.
The following table provides the sections covered in this chapter. Click the topic to view
it.
C300 Controller start up
Initiating a controller Shutdown
C300 faceplate indicators/displays
FTE activity LEDs
Control Builder block icon descriptions
Activate the C300 Controller CEE
Initiating Synchronization command
Disable Synchronization command
Initiating Becom e Primary command
Initiating Switchover command
Interacting through Station displays
Viewing controller operation and status using Monitor tab
C300 operating behaviors
C300 Controller overload behavior
R500
April 2017
Topic
Series 8 C300 Controller User's Guide
Honeywell
173