Configure A Secondary C300 Controller Block - Honeywell C300 User Manual

4. C300 Controller Configuration

4.4. Configure a Secondary C300 Controller block

4.4 Configure a Secondary C300 Controller block
When a C300 Controller is configured as Redundant, the Secondary C300 Controller
block is added to the Project tab automatically.
Prerequisites

Control Builder is running

Tree windows are open
Considerations
All illustrations used in the procedure are for example purposes only.
To configure a Secondary C300 Controller block, perform the following steps.
Step
1
In the Project window, right-click on the
C300_SEC_1 block icon.
2
Click Module Properties...
58
Action
Series 8 C300 Controller User's Guide
Honeywell
Result
The shortcut menu appears.
The Secondary C300 Block configuration
form appears.
R500
April 2017