Peer Communications Tab - Honeywell C300 User Manual

5. C300 Configuration Form Reference
5.3. CEEC300 Function Block

Peer Communications tab

The Peer Communications tab contains information about peer connections. It gives
statistics for connections initiated by the CEEC300 block and connections on which the
CEEC300 responds. The following table summarizes the parameter data you can monitor
on the Peer Communications tab of the configuration form for the selected CEEC300
block.
Plain Text
Initiator Connections
Target Name
Target Path
Connection Status
Connection Error
Code
Extended Error Info
Responder Connections
Originator Name
Average Get Rate
Maximum Get Rate
132
Parameter Name
IPEERNAME [ ]
IPEERPATH [ ]
IPEERCONNSTS [ ]
IPEERCONNERRCOD
E [ ]
IPEERCONNERRINFO
[ ]
RPEERNAME [ ]
CPEERAVGPPSCONN
[ ]
CPEERMAXPPSCONN
[ ]
Series 8 C300 Controller User's Guide
Honeywell
User
Configurable
No Shows the name of the
peer initiator.
No The peer initiator's
Automation System
Architecture (ASA)
path.
No The peer initiator
connection status.
No The ICP/ASA error
returned on an open
connection attempt.
No The ICP/ASA extended
error information
returned on an open
connection attempt.
No Name of the FIM or
IOLINK peer originator
block.
No The average number of
peer parameters/sec
processed by the CEE.
No The maximum number
of peer parameters/sec
processed by the CEE.
Notes
R500
April 2017