To assign Series 8 IO Modules to IOLINK blocks, perform the following steps.
Step
1
Click Edit > Execution Environment
Assignment. Or, click
button in the toolbar.
TIP
You can use common <Shift> plus click and <Control> plus click actions to select
multiple items in Available Modules and Assigned Modules lists.
R500
April 2017
4.13. Assign I/O Modules to C300 IOLINK blocks
Action
assignment
Series 8 C300 Controller User's Guide
Honeywell
4. C300 Controller Configuration
Result
The Execution Environment Assignment
dialog box appears. (There is no set
default state for the dialog, so it may
appear with different active fields than
shown below.)
81