Configuring Rmon Event Control - 3Com 3CRUS2475 User Manual

Configuring RMON
Event Control
To configure RMON Event Control:
1 Click Wired Ports > Stats > RMON Events > Control Setup. The
RMON Events Control Setup Page opens:
Figure 148 RMON Events Control Setup Page
The RMON Events Control Setup Page contains the following fields:
Event Entry — Displays the event.
■
Community — Displays the community to which the event belongs.
■
Description — Displays the user-defined event description.
■
Type — Describes the event type. Possible values are:
■
Log — Indicates that the event is a log entry.
■
Trap — Indicates that the event is a trap.
■
Log and Trap — Indicates that the event is both a log entry and a
■
trap.
None — Indicates that no event occurred.
■
Owner — Displays the device or user that defined the event.
■
2 Define the fields.

Configuring RMON Event Control

285